[Asterisk-Users] RE: [Asterisk-Users] cisco 186 helpp!ª!!!!

[Florian Overkamp]

Citeren "Shawn L. Djernes" <shawn at djernes.org>:

> Hello,
> 
> If you have the SIP firmware load in the unit then UseSIIP should be the
> first yellow box in the left column.  If you do not have that you may have a
> MGCP version and need to get a hold of the SIP firmware and Flash the unit
> first.

Oh BTW, the MGCP load works fine with Asterisk too, but the driver approach is 
different so the howto from Djernes would not match. It can be done however. 

-- 
Met vriendelijke groet,
Florian Overkamp
ObSimRef BV