[Asterisk-Users] best ISDN BRI solution for DID

[T Aksoy]

We have successfully tested isdn bri with DDIs, CID for one of our
customers. Basically they have 10 uk DDIs routed to a standard isdn 2 line.
Each ddi looks like a separate extension to *, and we also have a fax
capability which was configured using hylafax. Works well.

Tan
TelAppliant Ltd


----- Original Message ----- 
From: "Iain Stevenson" <iain at iainstevenson.com>
To: <asterisk-users at lists.digium.com>
Sent: Saturday, June 21, 2003 10:50 AM
Subject: Re: [Asterisk-Users] best ISDN BRI solution for DID


>
>
> --On Saturday, June 21, 2003 06:28:32 +0000 "WipeOut ."
> <wipeout at linuxmail.org> wrote:
>
> > So far I have just got it to the point where I am able to make calls and
> > have not had the serious echo problems that everyone warns about when
> > using a passive card.. .
> >
>
> ... you're using chan_capi - maybe that's the answer to the echo issue.
My
> experience wirh echo and delay problems was with a passive card on i4l.
> IMHO new users need to be careful to pick the right ISDN card or they'll
> end up disappointed.
>
> With some cards there is also the issue of capi drivers ie make sure there
> is one for your chosen Linux platform before you buy the card.  I may be
> the only ppc user on the list but you can reckon any binary capi driver
> will only be x86.
>
>   Iain
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>