AW: AW: [Asterisk-Users] Problem with outgoing spool...

[Thomas Häger]

Hallo Levent,

the filenames are all different.
And the files will be registered by * because i see the verbose messages....



-----Ursprüngliche Nachricht-----
Von: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Levent
Guendogdu
Gesendet: Freitag, 13. Juni 2003 16:47
An: asterisk-users at lists.digium.com
Betreff: Re: AW: [Asterisk-Users] Problem with outgoing spool...


Hi Thomas,

what about file names? Do all calls (in every run) get new filenames? I
had some problems when the file names remained the same. * wouldn't
detect the file as new. I added "-<timestamp> to the file names and
everything worked ok.

Bye,
 Lev.


On Fri, 2003-06-13 at 15:55, Thomas Haeger wrote:
> OK, sorry for my deficient description...
>
>
> Scenario is as follwes:
>
> One 4 BRI card ->
>
> 	ttyI0 - ttyI7 for outgoing
>
> second 4 BRI card ->
>
> 	ttyI8 - ttyI15	for Incoming
>
>
> My script generates 8 calls with a distance from 2 seconds.
> The files in the outgoing dir will be generated with an echo command.
> If the distance is smaller than 2 seconds sometimes calls never be
initiated
> but i can see the verbose messages for the calls.
> Then i can see channels if i enter "show channels" in the CLI with state
> "DOWN". But nothing else matters.....
> This is the point in time i have to restart * and my script.
>
>
>
>
>
> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thomas
> Haeger
> Gesendet: Freitag, 13. Juni 2003 15:23
> An: Asterisk User
> Betreff: [Asterisk-Users] Problem with outgoing spool...
>
>
> Hi all,
>
> i 've written a little Callgen script for generating calls through the
> outgoing spool directory.
> The calls goes over 8 ttyI devices to another pbx and come in through
other
> 8 ttyI devices.
>
> But when i generate the calls, sometimes * register the calls but never
> initiate them.
> Especially when the files come to fast into the outgoing dir.
>
> What can be wrong ?
>
> Is it possible that the i4l driver have a bug ?
> Or maybe the spooler is defective ?
>
>
> Thanks for Help,
>
> Thomas.
>
>
>
> *******************************************
> beroNet technologies GmbH
> Dipl.- Ing. Thomas Häger
> Potsdamer Str. 18 A
> 14513 Teltow
>
> FON:    +49 (0) 3328 3077731
> FAX:    +49 (0) 3328 334779
> Email:  thomas.haeger at beronet.com
> *******************************************
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users