[Asterisk-Users] capi_chan error - CAPI not loaded.

[Peer Oliver schmidt]

Good day,

*newbie alert*

I try to run * with capi_chan (and later on SIP).

System: Debian 3.0 / apt-getted most stuff except chan_capi and b1.t4

HW: AVM B1 ISA / Celeron 400 / 128MB RAM

Starting * the following ends up in the messages

Jul 22 19:47:03 WARNING[16384]: File chan_mgcp.c, Line 2925 
(load_module): Unable to get our IP address, MGCP disabled
Jul 22 19:47:03 WARNING[16384]: File chan_iax2.c, Line 5578 
(load_module): Unable to open IAX timing interface: No such file or 
directory
Jul 22 19:47:03 WARNING[16384]: File chan_iax2.c, Line 5061 
(set_config): Ignoring port for now
Jul 22 19:47:03 NOTICE[16384]: File chan_capi.c, Line 2237 (mkif): 
ast_capi_pvt(31,31,remote,1,2) (1,2,64) (0)(0.800000/0.800000)
Jul 22 19:47:03 NOTICE[16384]: File chan_capi.c, Line 2237 (mkif): 
ast_capi_pvt(31,31,remote,1,2) (1,2,64) (0)(0.800000/0.800000)
Jul 22 19:47:03 NOTICE[16384]: File chan_capi.c, Line 2237 (mkif): 
ast_capi_pvt(57,57,58,kapejod,1,2) (1,2,64) (0)(0.800000/0.800000)
Jul 22 19:47:03 NOTICE[16384]: File chan_capi.c, Line 2237 (mkif): 
ast_capi_pvt(57,57,58,kapejod,1,2) (1,2,64) (0)(0.800000/0.800000)
Jul 22 19:47:03 NOTICE[16384]: File chan_capi.c, Line 2237 (mkif): 
ast_capi_pvt(56,59,demo,1,2) (1,2,64) (0)(0.800000/0.800000)
Jul 22 19:47:03 NOTICE[16384]: File chan_capi.c, Line 2237 (mkif): 
ast_capi_pvt(56,59,demo,1,2) (1,2,64) (0)(0.800000/0.800000)
Jul 22 19:47:03 NOTICE[16384]: File chan_capi.c, Line 2568 
(load_module): CAPI not installed!
Jul 22 19:47:03 WARNING[16384]: File loader.c, Line 299 
(ast_load_resource): chan_capi.so: load_module failed, returning -1
Jul 22 19:47:03 WARNING[16384]: File chan_capi.c, Line 2653 
(unload_module): Unable to unregister from CAPI!
Jul 22 19:47:03 WARNING[16384]: File loader.c, Line 394 (load_modules): 
Loading module chan_capi.so failed!

It says CAPI not installed, how ever CAPIINFO returns the following output:

Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.03-01  (48.49)
Serial Number: 0204425
BChannels: 2
Global Options: 0x00000009
    internal controller supported
    DTMF supported
B1 protocols support: 0x8000001f
    64 kbit/s with HDLC framing
    64 kbit/s bit-transparent operation
    V.110 asynconous operation with start/stop byte framing
    V.110 synconous operation with HDLC framing
    T.30 modem for fax group 3
B2 protocols support: 0x00000a1b
    ISO 7776 (X.75 SLP)
    Transparent
    LAPD with Q.921 for D channel X.25 (SAPI 16)
    T.30 fro fax group 3
    V.120 asyncronous mode
    V.120 bit-transparent mode
B3 protocols support: 0x0000003f
    Transparent
    T.90NL, T.70NL, T.90
    ISO 8208 (X.25 DTE-DTE)
    X.25 DCE
    T.30 for fax group 3

   0100
   0200
   09000000
   1f000080
   1b0a0000
   3f000000
   00000000 00000000 00000000 00000000 00000000 00000000
   00000000 00000000 00000000 00000000 00000000
FAC GET - Info: Facility not supported (0x300b)

If information is missing, please tell me. If you have suggestions, I am 
all open.

TIA

rgds
pos