[Asterisk-Users] serious dtmf recognition problem.

[Steven Critchfield]

Please don't use reply all function on the list. I receive list mail and
will see yours without getting a special copy in my INBOX.

On Fri, 2003-07-18 at 11:19, Joe Antkowiak wrote:
> Other auto dialers that I tested connected to the same channel on the same channel bank work fine, only because they wait longer before dialing after verifying they have a dialtone.
> 
> But, in any case, this is a CAC adit 600 with an FXS-8 card.
> 
> -----Original Message-----
> From: Steven Critchfield <critch at basesys.com>
> Date: 18 Jul 2003 02:55:44 -0500
> To: asterisk-users at lists.digium.com <asterisk-users at lists.digium.com>
> Subject: RE: [Asterisk-Users] serious dtmf recognition problem.
> 
> I haven't had any problem with DTMF detection, so lets also look at what
> channel bank are you using. 
> 
> A crude hack is to find out where the cc machine is dialing and just
> assume any call from that line of the channel bank is only going to dial
> the cc machine number.   
> 
> On Fri, 2003-07-18 at 02:46, Joe Antkowiak wrote:
> > Unfortunately, I have no way of changing the dialed number on the credit
> > card machine =/
> > 
> > Is there any way I can get asterisk to recognize those first few digits?
> > Something I could modify in the source?
> > 
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Steve Underwood
> > Sent: Friday, July 18, 2003 12:32 AM
> > To: asterisk-users at lists.digium.com
> > Subject: Re: [Asterisk-Users] serious dtmf recognition problem.
> > 
> > Hi Joe,
> > 
> > Most auto-dialers will accept commas in the dial string, and insert 
> > delays where they occur. Will that work for you? Its normally used to 
> > insert a delay after a 9 on a PBX, to get a stable outside line before 
> > further dialing.
> > 
> > Regards,
> > Steve
> > 
> > 
> > Joe Antkowiak wrote:
> > 
> > > Hi,
> > >
> > > I am using a channel bank and zaptel hardware. I have a credit card 
> > > machine on one of the channels that appears to be dialing "too soon" 
> > > for asterisk, every complete number recognized by asterisk is missing 
> > > the first 1-4 numbers. This is a serious problem for me, anyone have 
> > > any ideas on whats going on? The pstn picks up on the dtmf tones just 
> > > fine.
> > >
> > > I was able to get it to work 50% of the time by adding:
> > >
> > > exten => _8XXNXXXXXX,1,Dial(Zap/g2/1${EXTEN})
> > >
> > > but that's really ugly.
> > >
> > 
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield  <critch at basesys.com>