[Asterisk-Users] serious dtmf recognition problem.

[Joe Antkowiak]

Unfortunately, I have no way of changing the dialed number on the credit
card machine =/

Is there any way I can get asterisk to recognize those first few digits?
Something I could modify in the source?

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Steve Underwood
Sent: Friday, July 18, 2003 12:32 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] serious dtmf recognition problem.

Hi Joe,

Most auto-dialers will accept commas in the dial string, and insert 
delays where they occur. Will that work for you? Its normally used to 
insert a delay after a 9 on a PBX, to get a stable outside line before 
further dialing.

Regards,
Steve


Joe Antkowiak wrote:

> Hi,
>
> I am using a channel bank and zaptel hardware. I have a credit card 
> machine on one of the channels that appears to be dialing "too soon" 
> for asterisk, every complete number recognized by asterisk is missing 
> the first 1-4 numbers. This is a serious problem for me, anyone have 
> any ideas on whats going on? The pstn picks up on the dtmf tones just 
> fine.
>
> I was able to get it to work 50% of the time by adding:
>
> exten => _8XXNXXXXXX,1,Dial(Zap/g2/1${EXTEN})
>
> but that's really ugly.
>


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users