[Asterisk-Users] ISDN PRI E1 configuration with E100P

[surajee at infotechs.lk]

Very sorry about the previous mail,
heres the mail again,

hi Everyone,

We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the 
asterisk, cards also starts fine, givin following output,

*CLI> 
  == D-Channel on span 1 up
    -- B-channel 1 successfully restarted on span 1
    -- B-channel 2 successfully restarted on span 1
       . . .
    -- B-channel 31 successfully restarted on span 1

but, when we make a call to this E1 from outside, it gives the following error,

WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call specified, but not found?
WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 1
WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call specified, but not found?
WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 2

does anybody hav an idea on this?

our zaptel.conf is,

#E100p card
span=1,0,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

zapata.conf,

;E100p card
switchtype=EuroISDN
signalling=pri_cpe
pridialplan=unknown
context=incoming
group = 2
channel => 1-15,17-31

Thanks inadvance,

Surajee



--------------This mail sent through OmniBIS.com--------------