[Asterisk-Users] TDM10B - Dies after a few hours

[Brad Bergman]

I've been having trouble with a TDM10B that I installed a few days ago.  
At first I could not modprobe it at all (getting the errors below). I
switched the X100P that was also installed (with a Motorola chip) with one
with a Tiger-something chip, and then everything starts up okay.

However, after a few hours, the FXS port dies (no battery or anything), 
and if I try to rmmod & modprobe again, I can't.

modprobe wcfxs
/lib/modules/2.4.18-14/misc/wcfxs.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, 
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-14/misc/wcfxs.o: insmod 
/lib/modules/2.4.18-14/misc/wcfxs.o failed
/lib/modules/2.4.18-14/misc/wcfxs.o: insmod wcfxs failed

I have seen a couple of references to this or similar problems, but no 
solution...
http://lists.digium.com/pipermail/asterisk-users/2003-May/011171.html
http://lists.digium.com/pipermail/asterisk-users/2003-May/012891.html

Anyone have any ideas?  I realize that there are some problems with the
board in general, but this one doesn't really seem similar.

Thanks,
Brad