[Asterisk-Users] problems with new FXS module

Paulo Mannheimer paulohm at instant.com.br
Mon Jul 7 05:32:39 MST 2003


HI, I just installed an additional module to a TDM400P card. Everything
worked fine for a while, but after rebooting the server the new channel
fails to be recognized by asterisk. Here is the output
 
 == Parsing '/etc/asterisk/zapata.conf': Found
    -- Registered channel 1, FXS Kewlstart signalling
    -- Registered channel 2, FXO Kewlstart signalling
    -- Registered channel 3, FXO Kewlstart signalling
WARNING[1024]: File chan_zap.c, Line 576 (zt_open): Unable to specify
channel 4: No such device
ERROR[1024]: File chan_zap.c, Line 4746 (mkintf): Unable to open channel
4: No such device
here = 0, tmp->channel = 0, channel = 4
ERROR[1024]: File chan_zap.c, Line 6404 (load_module): Unable to
register channel '2-4'
WARNING[1024]: File loader.c, Line 299 (ast_load_resource): chan_zap.so:
load_module failed, returning -1
WARNING[1024]: File loader.c, Line 394 (load_modules): Loading module
chan_zap.so failed!
 
 
my /etc/zaptel.conf
fxsks=1
fxoks=2-4
loadzone = us
defaultzone=us
 
 
my /etc/asterisk/Zapata.conf
signalling=fxs_ks
channel=1
signalling=fxo_ks
channel=2-4
 
Here is the output for cat /proc/zaptel/*
Span 1: WCFXO/0 "Wildcard X101P Board 1"
        1 WCFXO/0/0 FXSKS
Span 2: WCFXS/0 "Wildcard S400P Prototype Board 1"
        2 WCFXS/0/0 FXOKS
        3 WCFXS/0/1 FXOKS
        4 WCFXS/0/2 FXOKS
        5 WCFXS/0/3
 
Any hints?
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030707/9c5591ca/attachment.htm


More information about the asterisk-users mailing list