[Asterisk-Users] IConnectHere: Outbound working, Inbound not working....

Oliver Brandt oliver_mlisten at gmx.de
Mon Feb 17 12:15:55 MST 2003


Hi,

> Now I'm trying to get inbound calling working.  It seems that
> when a call comes into Asterisk via iconnecthere it always falls
> into the "s" extention.  I have two phone numbers with
> iconnecthere and want to route calls to each of the numbers
> differently.  Can this be done?  If so, how?
> 
> Basically I want callers to 1813342XXXX to be routed to 2102 and
> calls to 1202454XXXX to be routed to 2103

I have not worke with incomming calls through iconnect so I'm not shure
if this is what you need, but how about setting different contexts for
your two iconnect numbers in your sip.conf? Then each should drop into
its own context in the extensions.conf and you can do what ever you want
with the calls.
Hope this heped!
Good luck!
Oliver

> 
> Thanks in advance for any help!
> 
> Here are my config files:
> 
> ;
> ; SIP Configuration for Asterisk
> ;
> [general]
> port = 5060			; Port to bind to
> bindaddr = 0.0.0.0		; Address to bind to
> context = default		; Default for incoming calls
> register=1813342XXXX:XXXXXX at sipauth.deltathree.com 
> register=1202454XXXX:XXXXXX at sipauth.deltathree.com 
> 
> [iconnecthere]
> type=friend
> username=XXXXXX
> secret=XXXXXX
> host=sipauth.deltathree.com
> context=default
> 
> [2102]
> type=friend
> secret=XXXXXX
> host=dynamic
> context=default
> 
> [2103]
> type=friend
> secret=XXXXXX
> host=dynamic
> context=default
> 
> ;
> ; Extention Configuration for Asterisk
> ;
> [default]
> 
> exten => 2102,1,Dial,SIP/2102 at 2102
> exten => 2102,2,Voicemail(2102)
> 
> exten => 2103,1,Dial,SIP/2103 at 2103
> exten => 2103,2,Voicemail(2103)
> 
> exten => _91XXXXXXXXXX,1,Dial,SIP/${EXTEN-1}@iconnecthere
> exten => _91XXXXXXXXXX,2,Congestion
> 
> exten => s,1,Wait,1			; Wait a second, just for fun
> exten => s,2,Answer			; Answer the line
> exten => s,3,DigitTimeout,5		; Set Digit Timeout to 5 seconds
> exten => s,4,ResponseTimeout,10		; Set Response Timeout to 10 seconds
> exten => s,5,Directory,default
> 
> exten => t,1,Goto(#,1)			; If they take too long, give up
> exten => i,1,Playback(invalid)		; "That's not valid, try again"
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list