[Asterisk-Users] E100P configuration

Dawid Mielnik D.Mielnik at elka.pw.edu.pl
Wed Dec 31 05:04:47 MST 2003


Scott,

Thanks a lot ! this is exaclty what I wanted. Both my E1's came up without
problems.

Best regards,
Dave

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Scott Stingel
Sent: Tuesday, December 30, 2003 3:42 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] E100P configuration


Hi-

Not sure that I understand your question about grouping, but here is what I
use for 2 E1's connected to a private switch (in addition to the other
parameters)  Note that I use the pri_cpe ("customer premise equipment")
setting.  The defined channels act as one big group of 60 channels, if
that's what you mean.  Your telephone company will define the call
distribution for your incoming calls:

pridialplan=unknown
context=incoming
usecallerid=yes
group=1

signalling=pri_cpe
channel => 1-15,17-31
channel => 32-46,48-62

Regards,
Scott

Scott M. Stingel
Emerging Voice Technology Inc.
Palo Alto, California and London, England

Email:          scott "at" evtmedia.com
URL:            www.evtmedia.com



-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Dawid Mielnik
Sent: Tuesday, December 30, 2003 11:50 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] E100P configuration


Hi !

I am trying to configure two E100P cards, but I am a bit confused with
zapta.conf in what I am trying to achieve.

The * will be connected to a pstn switch with two E1 PRI lines. The E1 lines
will be used for incoming calls as well as outgoing calls.

My problem now is what to put in zapta.conf, I would like to group all
channels from both cards together (if that's possible). Does this make sense
?

context=default
switchtype=euroisdn
signalling=pri_net
;pridialplan=national
overlapdial=yes
group=1
channel => 1-15,17-31,32-46,48-62

what does "channel include" ? all the channels d and b ?

Thanks for your help.

Dave

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list