[Asterisk-Users] call pickup via *8 from ata186 (SIP)

[CW_ASN]

Actually, I'm using:

Version: v3.0.0 atasip (Build 031210A)

AudioMode: 0x00140014
CallFeatures: 0x00000000
PadiFeatures: 0x00000000
CallerIdMethod: 0x00019e60
FeatureTimer: 0x00000000
FeatureTimer2: 0x0000001e
Polarity: 0x00000000
ConnectMode: 0x00460400
TimeZone: 17
TOS: 0x000000a0
SigTimer: 0x01418564
OpFlags: 0x00000002
VLANSetting: 0x0000002b

Please re-check your sip.conf configuration, make sure that pickupgroup and
callgroup are present and correctly referenced with another device.

Hope this helps

Regards,

Gustavo


----- Original Message -----
From: "Anton Yurchenko" <phila at dg.net.ua>
To: <asterisk-users at lists.digium.com>
Sent: Monday, December 29, 2003 8:30 AM
Subject: Re: [Asterisk-Users] call pickup via *8 from ata186 (SIP)


> CW_ASN wrote:
>
> >It works for me with sip 2.15, 2.16.x and 3 versions.
> >
> >
> >
>
> I have FW version :
>
> *ata0009e88e33cd*
> Version: v2.15 ata18x (Build 020927a)
> MAC: 0.9.232.142.51.205
>
> what other parameters should I use? What  AudioMode?
>
> thanks
>
> >----- Original Message -----
> >From: "Anton Yurchenko" <phila at dg.net.ua>
> >To: <asterisk-users at lists.digium.com>
> >Sent: Monday, December 29, 2003 6:42 AM
> >Subject: [Asterisk-Users] call pickup via *8 from ata186 (SIP)
> >
> >
> >
> >
> >>Hello,
> >>
> >>Does call pickup works with ATA-186 SIP? at the same pbx it works with
> >>MGCP but bit ata-186 with SIP it doesnt work, just nothing happens.
> >>Anyone have it working? Also it seems that when typing "reload" on the
> >>console, the asterisk doesnt reread the mgcp.conf.
> >>
> >>please answer
> >>
> >>Thanks
> >>
> >>--
> >>
> >>Anton Yurchenko<phila at dg.net.ua>
> >>Digital Generation
> >>
> >>
> Anton Yurchenko<phila at dg.net.ua>
> Digital Generation
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>