[Asterisk-Users] transfer with MGCP

[Pavel Litvinenko]

Pavel Litvinenko wrote:

> Anton Yurchenko wrote:
>
>> Pavel Litvinenko wrote:
>>
>>> Anton Yurchenko wrote:
>>>
>>>>
>>>>
>>>> Hello,
>>>>
>>>> I`m try to make the attended transfer work Dlink DG-104S via FLASH, 
>>>> when somebody calls my phone I pickup and press flash to get a 
>>>> second line to call another extension. When I press flash I hear no 
>>>> dialtone, and only a long and then small beep. When I try to dial 
>>>> digits I hear again those long+short beeps, but the extension 
>>>> dialed is not ringing. If I pres flash again I get back to the 
>>>> previous caller. On the console I see those digits that I dial 
>>>> after pressing flash. What is wrong? here is my mgcp.conf and exept 
>>>> from the console about this call.
>>>>
>>> ... bug in firmware - I have almost fixed that by upgrading image 
>>> (now this problem rises once per week with ~100 calls from this 
>>> device per day )
>>>
>>> what firmware is running on your dg104 ?  did you try reload dlink ?
>>>
>> I had booted it this morning and only had like 10 calls today. The 
>> firmware is:
>> Boot PROM Version 3.0B14-C
>> Firmware Version 3.0B35-C
>>
> Boot PROM Version     3.0B22-D
> Firmware Version     3.0B44-D

ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip