[Asterisk-Users] RxFAX application
Sergio Serrano Revuelto
sergio.serrano at avanzada7.com
Fri Dec 19 06:49:15 MST 2003
Hi all,
I have tested RxFAX application through X100P card. When Fax
arrive i obtain the next trace:
-- Starting simple switch on 'Zap/1-1'
-- Executing Answer("Zap/1-1", "") in new stack
-- Executing SetMusicOnHold("Zap/1-1", "random") in new stack
-- Executing WaitMusicOnHold("Zap/1-1", "5") in new stack
-- Started music on hold, class 'random', on Zap/1-1
-- Redirecting Zap/1-1 to fax extension
-- Stopped music on hold on Zap/1-1
== Spawn extension (default, fax, 0) exited non-zero on 'Zap/1-1'
-- Executing RxFAX("Zap/1-1", "/var/spool/asterisk/fax/uno.tif") in
new stack Changed from phase 0 to 1 Start receiving document Changed
from phase 1 to 4 Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK Inch-based resolution preferred: no Metric-based
resolution preferred: no Minimum scan line time for higher resolutions:
T15.4 = T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
<<< TSI: 43 32 32 39 30 31 30 31 35 39 20 20 20 20 20 20 20 20 20 20 20
TSI without final frame tag Remote fax gave TSI as: "951010922" <<< DCS:
83 00 c6 f0 80 80 00 DCS with final frame tag In state 9
DCS:
Store and forward Internet fax: no
Real-time Internet fax: no
Can receive fax
Data signalling rate: V.29, 9600bps
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 0ms
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 = T7.7
Get at V.29
Changed from phase 3 to 5
Fast carrier up
Fast carrier down
Changed from phase 5 to 4
0 bad bits in trainability test
Start rx document - compression 2
Start rx page
>>> CFR: 84
HDLC underflow in state 5
Post trainability
Changed from phase 4 to 5
Fast carrier up
Fast carrier down
Fast carrier up
Fast carrier down
Fast carrier up
Fast carrier down
Fast carrier up
Equalizer state:
-7 ( 0.00000, 0.00000) -> 0.00000
-6 ( 0.00000, 0.00000) -> 0.00000
-5 ( 0.00000, 0.00000) -> 0.00000
-4 ( 0.00000, 0.00000) -> 0.00000
-3 ( 0.00000, 0.00000) -> 0.00000
-2 ( 0.25105, 0.74039) -> 0.61121
-1 ( -0.87268, -0.36304) -> 0.89337
0 ( -1.79414, -2.01854) -> 7.29345
1 ( -0.87268, -0.36304) -> 0.89337
2 ( 0.25105, 0.74039) -> 0.61121
3 ( 0.00000, 0.00000) -> 0.00000
4 ( 0.00000, 0.00000) -> 0.00000
5 ( 0.00000, 0.00000) -> 0.00000
6 ( 0.00000, 0.00000) -> 0.00000
7 ( 0.00000, 0.00000) -> 0.00000
Equalizer state:
-7 ( 0.00649, -0.03380) -> 0.00118
-6 ( 0.02073, -0.00508) -> 0.00046
-5 ( 0.03125, -0.04397) -> 0.00291
-4 ( 0.02094, -0.05189) -> 0.00313
-3 ( 0.00954, -0.02848) -> 0.00090
-2 ( 0.26182, 0.72429) -> 0.59315
-1 ( -0.84074, -0.41198) -> 0.87657
0 ( -1.76021, -2.05082) -> 7.30420
1 ( -0.85500, -0.38151) -> 0.87658
2 ( 0.22413, 0.68563) -> 0.52033
3 ( -0.03512, -0.10808) -> 0.01291
4 ( -0.02204, -0.03244) -> 0.00154
5 ( 0.04513, 0.11010) -> 0.01416
6 ( 0.05265, 0.07431) -> 0.00829
7 ( -0.01433, -0.11280) -> 0.01293
Equalizer state:
-7 ( 0.14017, 0.08799) -> 0.02739
-6 ( -0.18079, -0.02633) -> 0.03338
-5 ( 0.00565, 0.03149) -> 0.00102
-4 ( 0.15813, -0.07292) -> 0.03032
-3 ( -0.28991, -0.34523) -> 0.20324
-2 ( 0.10369, 0.59990) -> 0.37063
-1 ( 0.03284, -0.02606) -> 0.00176
0 ( -0.11463, -0.90551) -> 0.83309
1 ( 0.03712, 0.71173) -> 0.50794
2 ( -0.46280, 0.55488) -> 0.52208
3 ( -1.38062, -1.69745) -> 4.78743
4 ( -0.95295, -1.72961) -> 3.89964
5 ( 0.03678, 0.07704) -> 0.00729
6 ( 0.29737, 0.77668) -> 0.69166
7 ( -0.14636, -0.40090) -> 0.18214
Fast carrier training failed
Equalizer state:
-7 ( 0.10167, 0.06545) -> 0.01462
-6 ( -0.18556, -0.02461) -> 0.03504
-5 ( 0.03031, 0.02655) -> 0.00162
-4 ( 0.18932, -0.08902) -> 0.04377
-3 ( -0.27593, -0.35412) -> 0.20154
-2 ( 0.10286, 0.60211) -> 0.37311
-1 ( 0.02693, -0.04263) -> 0.00254
0 ( -0.11627, -0.93750) -> 0.89242
1 ( 0.05136, 0.71292) -> 0.51089
2 ( -0.42897, 0.60647) -> 0.55182
3 ( -1.34283, -1.65177) -> 4.53153
4 ( -0.93566, -1.74854) -> 3.93285
5 ( 0.01456, 0.00457) -> 0.00023
6 ( 0.25813, 0.72770) -> 0.59617
7 ( -0.16644, -0.38103) -> 0.17289
Fast carrier down
Fast carrier up
Fast carrier down
Fast carrier up
Fast carrier down
Fast carrier up
Equalizer state:
-7 ( 0.00000, 0.00000) -> 0.00000
-6 ( 0.00000, 0.00000) -> 0.00000
-5 ( 0.00000, 0.00000) -> 0.00000
-4 ( 0.00000, 0.00000) -> 0.00000
-3 ( 0.00000, 0.00000) -> 0.00000
-2 ( -0.01584, 0.69450) -> 0.48258
-1 ( -0.63544, -0.66028) -> 0.83976
0 ( -1.27610, -2.60252) -> 8.40156
1 ( -0.63544, -0.66028) -> 0.83976
2 ( -0.01584, 0.69450) -> 0.48258
3 ( 0.00000, 0.00000) -> 0.00000
4 ( 0.00000, 0.00000) -> 0.00000
5 ( 0.00000, 0.00000) -> 0.00000
6 ( 0.00000, 0.00000) -> 0.00000
7 ( 0.00000, 0.00000) -> 0.00000
Equalizer state:
-7 ( 0.01729, -0.02378) -> 0.00086
-6 ( 0.00842, -0.00890) -> 0.00015
-5 ( 0.02844, -0.01999) -> 0.00121
-4 ( 0.04652, -0.02743) -> 0.00292
-3 ( 0.01867, -0.02455) -> 0.00095
-2 ( -0.00929, 0.67264) -> 0.45253
-1 ( -0.60910, -0.68078) -> 0.83446
0 ( -1.22249, -2.61184) -> 8.31617
1 ( -0.61487, -0.66761) -> 0.82377
2 ( -0.02600, 0.63082) -> 0.39861
3 ( -0.01942, -0.09216) -> 0.00887
4 ( -0.00753, -0.01532) -> 0.00029
5 ( 0.00905, 0.11644) -> 0.01364
6 ( 0.03480, 0.07496) -> 0.00683
7 ( 0.02605, -0.10599) -> 0.01191
Equalizer state:
-7 ( 0.12394, 0.07182) -> 0.02052
-6 ( -0.23955, -0.03540) -> 0.05864
-5 ( 0.02479, 0.00434) -> 0.00063
-4 ( 0.23746, -0.07843) -> 0.06254
-3 ( -0.13782, -0.31438) -> 0.11783
-2 ( -0.19560, 0.54387) -> 0.33406
-1 ( 0.11114, 0.07807) -> 0.01845
0 ( 0.09516, -1.03824) -> 1.08700
1 ( -0.15217, 0.70940) -> 0.52640
2 ( -0.58077, 0.48989) -> 0.57728
3 ( -0.73900, -2.01423) -> 4.60325
4 ( -0.21887, -1.96429) -> 3.90635
5 ( 0.03451, -0.13917) -> 0.02056
6 ( -0.02000, 0.76330) -> 0.58303
7 ( -0.00427, -0.30750) -> 0.09457
Fast carrier trained
Equalizer state:
-7 ( 0.13597, 0.04992) -> 0.02098
-6 ( -0.24706, -0.04071) -> 0.06269
-5 ( 0.01439, 0.01149) -> 0.00034
-4 ( 0.24032, -0.07076) -> 0.06276
-3 ( -0.12811, -0.31134) -> 0.11334
-2 ( -0.19000, 0.54483) -> 0.33294
-1 ( 0.11261, 0.07616) -> 0.01848
0 ( 0.09853, -1.04006) -> 1.09144
1 ( -0.14424, 0.71451) -> 0.53133
2 ( -0.56515, 0.49992) -> 0.56931
3 ( -0.72070, -2.01557) -> 4.58195
4 ( -0.21312, -1.98480) -> 3.98486
5 ( 0.01679, -0.16590) -> 0.02781
6 ( -0.04451, 0.75304) -> 0.56904
7 ( -0.01415, -0.29305) -> 0.08608
Fast carrier down
Segmentation fault
And i obtain 8 byte tif file.
Any Idea? I have installed tiff-3.5.7 and spandsp-20031021.
Best Regards,
srsergio
More information about the asterisk-users
mailing list