[Asterisk-Users] Problem with R2 signaling

[asterisk at aconectarse.com]

Hello,
  
  
I am in Argentina configuring an E1 in R2 and  have some inconveniences.  
  
When the call takes the salient line, I receive an error of signaling.  
  
In * I have loaded the following:

- libr2 installed
- The [ar] in zonedata.c and indications.conf is configured
- zaptel.conf o:

span=1,0,0,ccs,hdb3,crc4
span=2,0,0,cas,hdb3
#span1
bchan=1-15,17-31
dchan=16
#span2
cas=32-62:1001
alaw=1-62
loadzone=ar
defaultzone=ar

- In zapata.conf I configured alone the ISDN.

- Signaling:

06450 0000000                          S   0000 1001 H'46   BT27D-2913
06450 0000000                          R   0000 1001 H'46   BT27D-2913
14000 0007550 SEIZURE                  S   0000 1000 H'47   BT27D-2913
14200 0000200 SIG. FAULT               R   0000 1001 H'37   BT27D-2913
RECORDING STOPPED PERMANENTLY BY OPERATOR
END                                            

Best Regards...

Leo.





-----------------------------------------------------------------
Obtené tu casilla gratis con 20MB, en: http://www.aconectarse.com