[Asterisk-Users] MGCP IADs

[James Schenck]

I can setup one 104s with a Nat router between it and *    


dg104s----lan-------nat----lan-----asterisk-----lan------dg014s

That works great 

But if I try 

dg104s-----lan-------nat---internet----nat------internet------asterisk------
-------dg104s
  a                   1                 2
b

No luck

The dg104 a has no dial tone, now here is what is odd if I dial a from b a
rings but cannot answer and continues to ring in b's handset

I setup a as dmz host on nat 1 and have port 2427 mapped to * on nat 2



James Schenck
Egraph Design Inc.
Arkansas Online Internet Services
(870) 857-3287
IAXTEL (700) 857-3287
jims at egraphdesign.com

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Andrew Joakimsen
Sent: Saturday, December 06, 2003 11:41 AM
To: asterisk-users at lists.digium.com
Cc: asterisk at egraphdesign.com
Subject: RE: [Asterisk-Users] MGCP IADs

Have you tried just the DG104s behind nat?

Have you had any issues with call waiting?


> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users- 
> admin at lists.digium.com] On Behalf Of James Schenck
> Sent: Saturday, December 06, 2003 9:26 AM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] MGCP IADs
> 
> I am new to * and after getting some much needed help from someone on
the
> IRC channel with my config files I got my system up and going.
> I have several dlink DG 104s's and they seem to work fine on my LAN
the
> only
> trouble I have is trying to get them to work thru double Nat by that I 
> mean on both ends. My * box is behind Nat and I am trying to setup a 
> 104s
at
> another location behind Nat no luck so far but I will get it somehow.
> I have read in the lists that they loose their config but I have not
had
> that trouble the only advice I have is if you upgrade the firmware
reset
> to
> factory default after then configure the units with a serial cable
> 
> 
> James Schenck
> Egraph Design Inc.
> Arkansas Online Internet Services
> (870) 857-3287
> IAXTEL(700) 857-3287
> jims at egraphdesign.com
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Juan J.
> Sierralta P.
> Sent: Friday, December 05, 2003 11:14 PM
> To: Asterisk Users
> Subject: [Asterisk-Users] MGCP IADs
> 
> Hi,
> 
> 	For MGCP users. Is there any success stories with any MGCP IAD 
> vendor.
> I´m trying to find an IAD which works with Asterisk. I´ve tried the
Cisco
> IAD 2430 without success; but SIP on this IAD works but it´s limited
(no
> authentication, no notify messages, etc) and with higher density IAD
(16
> or
> more ports) it´s nice to control using MGCP.
> 	Any information will be apreciated !
> 
> Thanks.
> --
> Juanjo sin .sig
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users