[Asterisk-Users] Zaptel.conf & digium E100P

[Nicolas Cartron]

Hello,

Thanks  to members  of  the  list things  changed  on my  installation
(asterisk + digium E100P with of course an E1 line). 

Here is my zaptel.conf :
-
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone=fr
defaultzone=fr
-

Output of zttool:
-
   Alarms Span 
   YEL/RED Digium Wildcard E100P E1/PRA Card 0
-
 
[root at asterisk root]# head /proc/zaptel/1 
Span 1: WCT1/0  "Digium Wildcard E100P E1/PRA Card  0" HDB3/CCS YELLOW
RED 

           1 WCT1/0/1 ClearChannel (In use) 
           2 WCT1/0/2 ClearChannel (In use) 
           3 WCT1/0/3 ClearChannel (In use) 
           4 WCT1/0/4 ClearChannel (In use) 
           5 WCT1/0/5 ClearChannel (In use) 
           6 WCT1/0/6 ClearChannel (In use) 
           7 WCT1/0/7 ClearChannel (In use) 
           8 WCT1/0/8 ClearChannel (In use) 

-

There's  a blinking  red led  on the  E100P, previously  there  was no
light at  all, so  i guess  something changed even  if it's  not still
working, but i'm on the right way :)

any help would be greatly appreciated. 
Thanks.


-- 
Nicolas Cartron
nc at ncartron.org