[Asterisk-Users] Hardware question

[Brian West]

Seeing your PBX go down in flames due to bad hardware support...

PRICELESS!

On Thu, 21 Aug 2003, Anthony Wood wrote:

> Here are some options:
>
> Digium X100P x 4
> ----------------
> US$100 * 4 = US$400
> well supported by asterisk
> manufacturer supports asterisk developers
> Deployed in lots of places with Asterisk
>
> Voicetronix OpenLine4
> ---------------------
> US$500?
> Use 1 PCI card
> reported working with chan_vpb
> manufacturer supports linux
> Can be used with other software
>
> Voicetronix OpenSwitch 6(12)
> ------------------------
> US$750?(US$1800?)
> Use 1 PCI card
> works with chan_vpb
> manufacturer supports linux
> Can be used with other software
> 6/12 ports can be jumpered in pairs(4s?) to
> be FXO or FXS.
>
> Channel Bank + T/E 100/400 P
> ----------------------------
> US$?
> use 1 PCI card
>
>
> On Wed, Aug 20, 2003 at 08:27:06AM -0700, Bruce Ferrell wrote:
> > Digium makes a 4 port card.  It'd be hard to get 4 lines with quicknet
> > hardware.
> >
> > Bartosz Jozwiak wrote:
> > > Hello,
> > >
> > > Again one more question about hardware.
> > > What could you suggest me to buy.
> > > I need hardware to connect let's say 4 analog lines. (FXO).
> > > This hardware should "talk" to Asterisk of course..
> > > Thanks very much for some advices :)
> > >
> > > Bartek
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> Woody
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>