[Asterisk-Users] Problem with * server and FWD

[Brian West]

You are almost there... http://www.loligo.com/asterisk/current/

Check that.. see how he has it setup... you have a few things in this
config that will cause it to not work correctly.

bkw

On Wed, 20 Aug 2003, Yehiel Samson wrote:

>
>
> I have a small HUGE problem with *.
>
> I have installed * but I have 2 problems.
>
> 1 - Making call to FWD.
>
> 2 - Receiving call from FWD
>
> More info of the problem at the end.
>
>
>
> Here is the sip.conf file.
>
> ;
>
> ; SIP Configuration for Asterisk
>
> ;
>
> [general]
>
> port = 5060 ; Port to bind to
>
> bindaddr = 0.0.0.0 ; Address to bind to
>
> context = sip ;default Default for incoming calls
>
>
>
> register => 10082:mypass @fwd.pulver.com/201
>
>
>
> [fwd.pulver.com]
>
> type=peer
>
> username=10082
>
> host=fwd.pulver.com
>
>
>
> [200] ; This is the cisco ATA phone
>
> type=friend
>
> host=dynamic
>
> defaultip=192.168.0.167
>
> dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info
>
> context=sip
>
> callerid="Yehiel" <10082>
>
>
>
>
>
> The same on 201 (the other line on Cisco ATA)
>
>
>
>
>
> the extension.conf file:
>
>
>
> [sip]
>
> exten => 200,1,Dial(SIP/200,20,tr)
>
> exten => 201,1,Dial(SIP/201,20,tr)
>
> include => fwd
>
>
>
> [fwd.pulver.com]
>
> exten => _XXXXX,1,Dial(SIP/${EXTEN}@fwd.pulver.com)
>
> exten => _XXXXX,2,Congestion
>
>
>
>
>
> Now when I type in * "sip show peers" it gives :
>
>
>
> Name/username    Host                 Mask             Port     Status
>
> 201/201          192.168.0.167   (D)  255.255.255.255  5060     Unmonitored
>
> 200/200          192.168.0.167   (D)  255.255.255.255  5060     Unmonitored
>
> fwd/10082        192.246.69.223       255.255.255.255  5060     Unmonitored
>
>
>
> and when I type "sip show registry"
>
>
>
> Host                  Username     Refresh State
>
> 192.246.69.223:5060   10082            120 Registered
>
>
>
>
>
>
>
>
>
>
>
>
>
> Call inside the network work just fine. But when I want to go out ..
> nothing.
>
> Actually the phone does ring on the other side and when it answers this is
> what I get :
>
>
>
>     -- Executing Dial("SIP/200-a4e4", "SIP/14551 at fwd.pulver.com") in new
> stack
>
>     -- Called 13290 at fwd.pulver.com
>
>     -- SIP/fwd.pulver.com-a6c9 is ringing
>
>     -- SIP/fwd.pulver.com-a6c9 answered SIP/200-a4e4
>
>     -- Attempting native bridge of SIP/200-a4e4 and SIP/fwd.pulver.com-a6c9
>
>
>
> I can't hear and neither can the other side.
>
>
>
> What has to be done???
>
> And how do I fix it?
>
> Thank you very much.
>
>
>
>
>
> Best regards,
>
> Yehiel Samson
>
>
>
> yehiel at samson.co.il
>
> ICQ : 688268
>
> Yahoo : yehielsamson
>
> MSN : yehiel_samson at msn.com
>
> Phone/Fax : +972-2-5663234
>
> Cell phone : +972-50-877571 or +972-54-877571
>
> FWD # 10082 (www.FreeWorlDialup.com)
>
>
>
>