[Asterisk-Users] MWI question

[Wade Weppler]

FSK is supported.  Just add "mailbox=xxxx" before your channel declaration
in Zapata.conf.

Voltage-type MWI is not supported by Asterisk.

-wade

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Bill Schultz
> Sent: Tuesday, August 19, 2003 10:41 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] MWI question
> 
> Using a TE410P with Zhone 24FXS channel banks to power
> standard analog phones I can't seem to find out if it's possible to
> support FSK or voltage type message waiting lamps.  I don't want to
> use stutter dial tone because of the dramatic difference in per phone
> cost.
> 
> TIA
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users