[Asterisk-Users] Recomendations for an ISDN-PBX to use with asterisk

[WipeOut .]

Why not get IP phones and use Asterisk as the PBX from the start??

Will probably save you a LOT of money and many headaches...



> Hi,
> 
> I'm planning to buy a new ISDN-PBX (I hope this is the right term for an
> ISDN phone system). I would also like to connect it to asterisk. As far
> as I know there is no ISDN card where I can connect an ISDN-Phone to
> directly working together with asterisk (please correct me if I'm
> wrong). So what I was thinking of doing was to get a regular ISDN
> PBX and add a second internal S0 bus which I'd connect to asterisk using
> chan_capi. Now to place a call through asterisk I'd first have to dial
> into asteriks and then have asterisk give me a dialtone and recognice
> dtmf. Is there any way to just prefix the phonnumber with lets say a 9
> and then have the PBX transmit the rest of the number to asteriks so
> that I would not have to go through two dialtones? Any suggestions on
> what PBX to use if this is possible? It's supposed to be for a private
> home so I should not be some really expensive professional one...
> 
> Thank you very much!
> Regards
> 	Oliver
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze