[Asterisk-Users] '#' doesn't work for me

[Dan]

Hi,

The problem was not related to ZAP channel. Even between two local SIP phone
was the same.

I have solve it just changing something in the ATA configuration and then
butting back the old value. I still don't know the cause.

Thanks,
Dan

----- Original Message ----- 
From: "James Sizemore" <james at deny.org>
To: <asterisk-users at lists.digium.com>
Sent: Friday, August 15, 2003 3:34 PM
Subject: Re: [Asterisk-Users] '#' doesn't work for me


> Do you have transfer turn on in zapata.conf?
> transfer=yes
>
>
> >Hi,
> >
> >I cannot use '#' to initiate transfers.
> >I have tried on different phones (7960, ATA, X-Lite).
> >When I press '#' during a call, nothing happen.
> >I have both T and t switches in Dial application.
> >The transfer function works with Flash key on ATA, but in a very strange
> >way....The final destination is hunged up and then automatically called
by
> >the initial caller... This behavior request to put on hook the phone
> >connected to the ATA in order to accept the transfer. During this period
the
> >phone is busy for the caller, so I must use some tricks in the dialing
macro
> >in order to acomodate this.
> >
> >Any other suggestions to better solve the transfer function?
> >
> >
> >BR,
> >Dan
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>