[Asterisk-Users] '#' doesn't work for me

Dan dtoma at fx.ro
Thu Aug 14 08:15:45 MST 2003


Hi Martin,

I use ATA-186 (G.711) with two analog phones.
I can transfer using Flash, but nothing happen when press on '#'...

There is something else I have to check?

Thanks,
Dan

----- Original Message ----- 
From: "Martin Pycko" <martinp at digium.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, August 14, 2003 5:56 PM
Subject: Re: [Asterisk-Users] '#' doesn't work for me


> It works only with G711 (ulaw/alaw)
>
> regards
> Martin
>
> On Thu, 14 Aug 2003, Dan wrote:
>
> > Hi,
> >
> > I cannot use '#' to initiate transfers.
> > I have tried on different phones (7960, ATA, X-Lite).
> > When I press '#' during a call, nothing happen.
> > I have both T and t switches in Dial application.
> > The transfer function works with Flash key on ATA, but in a very strange
> > way....The final destination is hunged up and then automatically called
by
> > the initial caller... This behavior request to put on hook the phone
> > connected to the ATA in order to accept the transfer. During this period
the
> > phone is busy for the caller, so I must use some tricks in the dialing
macro
> > in order to acomodate this.
> >
> > Any other suggestions to better solve the transfer function?
> >
> >
> > BR,
> > Dan
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>




More information about the asterisk-users mailing list