[Asterisk-Users] FXO mode

[Emmanuel Bergmans]

In order to test CTR21, I was forced to comment the line in the source file as I did not find a define or a
zaptel.conf directive. It's really bad but... In my case this change has not solved the problem (see previous
posting)

in wcfx0.c

[...]
fxo_modes[] =
{
/*      { "FCC", 0, 0, 2, 0, 0, 0, 0 },         */
/* US */
        { "CTR21", 0, 0, 3, 0, 0, 3, 0 },       /* Austria, Belgium, Denmark, Finland, France, Germany,
                                                                                   Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands,
                                                                                   Norway, Portugal, Spain, Sweden,
Switzerland, and UK */
};
[...]


Dave Cotton wrote:
> 
> On Wed, 2003-08-13 at 18:50, Iain Stevenson wrote:
> > Assuming this is on incoming calls,
> 
> Yes
> 
> > the most usual source of the problem is
> > that the telco exchange either doesn't send a disconnect pulse or the wcfxo
> > driver doesn't recognise the format used.
> 
> Exactly, if * is stuck in FCC mode CTR21 will be a foreign language.
> 
> Somewhere in the code I should be able to either #define what I want or
> zaptel.conf should be able to set it
> --
> Dave Cotton <dcotton at linuxautrement.com>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

-- 

Perceval Helpdesk Team
helpdesk at perceval.net

----------------------------------------------------------------------------

Perceval Technologies sa/nv
Rue Tenbosch, 9
B-1000 Brussels
BELGIUM
Tel: +32-2-6409194
Fax: +32-2-6403154
URL: http://www.perceval.be/
E-mail for general information:         info at perceval.net
E-mail for technical information:       helpdesk at perceval.net
----------------------------------------------------------------------------

This e-mail message contains legally PRIVILEGED and CONFIDENTIAL 
information intended for the use of the addressee only. If you are not 
the intended recipient of this message, please notify the undersigned 
by telephone or e-mail reply and destroy this message and any attachments. 
Any views or opinions presented in this e-mail are solely those of 
the author and do not necessarily represent those of Perceval. The 
integrity and security of this message cannot be guaranteed and it may 
be subject to data corruption, interception, unauthorised amendment, 
viruses and unforeseen delays, for which we accept no liability.