[Asterisk-Users] Newbie Issue

[Dave Alan Caruana]

you have to make /etc/zaptel.conf
and /etc/asterisk/zapata.conf
match on the same type of signalling ..
should work then :)

cheers
Dave

----- Original Message -----
From: <jeff.gunther at intalgent.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, August 08, 2003 12:24 AM
Subject: [Asterisk-Users] Newbie Issue


>
>
>
>
> Hi All,
>
> I recently purchased the Asterisk Developer's Kit (TDM) to try out
> Asterisk. After following the directions in the Digium's FAQ topic
entitled
> "Q. How do I configure my TDM40B and X100P?", I'm receiving the following
> error:
>
> WARNING[1074428608]: File chan_zap.c, Line 6748 (load_module): Ignoring
> rxwink
> ERROR[1074428608]: File chan_zap.c, Line 6692 (load_module): Unknown
> signalling method 'fxs_ks # X100P'
> ERROR[1074428608]: File chan_zap.c, Line 4793 (mkintf): Signalling
> requested is FXO Loopstart but line is in FXS Kewlstart signalling
> ERROR[1074428608]: File chan_zap.c, Line 6498 (load_module): Unable to
> register channel '1'
> WARNING[1074428608]: File loader.c, Line 299 (ast_load_resource):
> chan_zap.so: load_module failed, returning -1
> WARNING[1074428608]: File loader.c, Line 394 (load_modules): Loading
module
> chan_zap.so failed!
>
> Any ideas?
>
> Jeff Gunther
> Intalgent Technologies
> voice:  +1 703.444.4404
> fax:  +1 703.444.2304
> jeff.gunther at intalgent.com
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>