[Asterisk-Users] Libpri and asterisk fail to install

[Martin Pycko]

well should be ok if you cvs update now.

Martin

On Wed, 6 Aug 2003, Rhys Hopkins wrote:

> Martin Pycko wrote:
> > You're looking for libncurses-dev and in libpri you can remove -Werror
> > from libpri/Makefile or cvs update libpri (it should be fixed)
> >
>
> Thanks for that - I installed ncurses-devel and asterisk now builds ok,
> but libpri still gives the following error:
>
> rhys2:/usr/src/libpri # make clean
> rm -f *.o *.so *.lo
> rm -f testpri libpri.a libpri.so.1.0
> rm -f pritest pridump
> rhys2:/usr/src/libpri # make install
> cc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g    -c -o
> pri.o pri.c
> cc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g    -c -o
> q921.o q921.c
> cc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g    -c -o
> prisched.o prisched.c
> cc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g    -c -o
> q931.o q931.c
> q931.c: In function `q931_handle_ie':
> q931.c:1394: warning: comparison between signed and unsigned
> make: *** [q931.o] Error 1
> rhys2:/usr/src/libpri #
>
>
> Regards,
>
> Rhys.
>
>
> > regards
> > Martin
> >
> > On Wed, 6 Aug 2003, Rhys Hopkins wrote:
> >
> >
> >>Hi,
> >>
> >>I am having trouble building and installing libpri and asterisk on my
> >>system. Zaptel seemed to install OK.
> >>
> >>I am running SuSE 8.2 ( Linux 2.4.20-4GB )
> >>I have made sure I have the prerequisites ( rpm versions shown below )
> >>
> >>rhys2:/usr/src/libpri # uname -a
> >>Linux rhys2 2.4.20-4GB #1 Fri Jul 11 07:33:18 UTC 2003 i686 unknown
> >>unknown GNU/Linux
> >>
> >>rhys2:/opt/libpri-0.3.2 # rpm -q openssl-devel
> >>openssl-devel-0.9.6i-12
> >>rhys2:/opt/libpri-0.3.2 # rpm -q readline-devel
> >>readline-devel-4.3-105
> >>rhys2:/opt/libpri-0.3.2 # rpm -q readline
> >>readline-4.3-105
> >>rhys2:/opt/libpri-0.3.2 # rpm -q openssl
> >>openssl-0.9.6i-12
> >>rhys2:/opt/libpri-0.3.2 # rpm -q kernel-source
> >>kernel-source-2.4.20.SuSE-62
> >>rhys2:/opt/libpri-0.3.2 # rpm -q termcap
> >>termcap-2.0.8-674
> >>
> >>
> >>This is the output from make clean ; make install for libpri:
> >>
> >>	rhys2:/usr/src/libpri # make clean
> >>	rm -f *.o *.so *.lo
> >>	rm -f testpri libpri.a libpri.so.1.0
> >>	rm -f pritest pridump
> >>	rhys2:/usr/src/libpri # make install
> >>	cc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g    	-c -o
> >>pri.o pri.c
> >>	cc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g    	-c -o
> >>q921.o q921.c
> >>	cc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g    -c -o
> >>prisched.o prisched.c
> >>	cc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g    -c -o
> >>q931.o q931.c
> >>	q931.c: In function `ie2str':
> >>	q931.c:1210: warning: comparison between signed and unsigned
> >>	q931.c: In function `msg2str':
> >>	q931.c:1227: warning: comparison between signed and unsigned
> >>	q931.c: In function `q931_dumpie':
> >>	q931.c:1251: warning: comparison between signed and unsigned
> >>	q931.c: In function `add_ie':
> >>	q931.c:1334: warning: comparison between signed and unsigned
> >>	q931.c: In function `q931_handle_ie':
> >>	q931.c:1394: warning: comparison between signed and unsigned
> >>	make: *** [q931.o] Error 1
> >>
> >>
> >>
> >>
> >>
> >>This is the end of the output from make install for asterisk ( full
> >>output attached as "asterisk_errors" )
> >>
> >>	loading cache ./config.cache
> >>	checking for gcc... gcc
> >>	checking whether the C compiler (gcc  ) works... yes
> >>	checking whether the C compiler (gcc  ) is a cross-compiler... 	no
> >>	checking whether we are using GNU C... yes
> >>	checking whether gcc accepts -g... yes
> >>	checking how to run the C preprocessor... gcc -E
> >>	checking host system type... i686-pc-linux-gnu
> >>	checking for a BSD compatible install... install
> >>	checking for ranlib... ranlib
> >>	checking for ar... /usr/bin/ar
> >>	checking for tgetent in -ltermcap... no
> >>	checking for tgetent in -ltinfo... no
> >>	checking for tgetent in -lcurses... no
> >>	checking for tgetent in -lncurses... no
> >>	configure: error: termcap support not found
> >>	make: *** [editline/config.h] Error 1
> >>
> >>As can be seen from the rpm queries above, I have termcap installed.
> >>
> >>
> >>
> >>
> >>Any help would be much appreciated.
> >>
> >>Regards,
> >>
> >>Rhys Hopkins
> >>
> >>Systems Administrator
> >>Culver Technologies Limited.
> >>
> >>
> >>
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>