[Asterisk-Users] two X100P cards and one TDM400P

[Mark Street]

modprobe + wcfxo

This will load zaptel modules before it loads wcfxo module

On Tue, 29 Apr 2003, Randy Smith wrote:

> When loading modules I get:
> Using /lib/modules/2.4.18-14/misc/wcfxo.o
> /lib/modules/2.4.18-14/misc/wcfxo.o: unresolved symbol zt_ec_chunk
> /lib/modules/2.4.18-14/misc/wcfxo.o: unresolved symbol zt_unregister
> /lib/modules/2.4.18-14/misc/wcfxo.o: unresolved symbol zt_alarm_notify
> /lib/modules/2.4.18-14/misc/wcfxo.o: unresolved symbol zt_hooksig
> /lib/modules/2.4.18-14/misc/wcfxo.o: unresolved symbol zt_transmit
> /lib/modules/2.4.18-14/misc/wcfxo.o: unresolved symbol zt_receive
> /lib/modules/2.4.18-14/misc/wcfxo.o: unresolved symbol zt_register
> Using /lib/modules/2.4.18-14/misc/wcfxs.o
> /lib/modules/2.4.18-14/misc/wcfxs.o: unresolved symbol zt_ec_chunk
> /lib/modules/2.4.18-14/misc/wcfxs.o: unresolved symbol zt_unregister
> /lib/modules/2.4.18-14/misc/wcfxs.o: unresolved symbol zt_hooksig
> /lib/modules/2.4.18-14/misc/wcfxs.o: unresolved symbol zt_transmit
> /lib/modules/2.4.18-14/misc/wcfxs.o: unresolved symbol zt_receive
> /lib/modules/2.4.18-14/misc/wcfxs.o: unresolved symbol zt_register
> Notice: Configuration file is /etc/zaptel.conf
> line 4: Unable to open master device '/dev/zap/ctl'
> 
> I'm stumped. I'm using the latest source on redhat 8. It was working with 
> dev lite (x100p and usb thingy)
> 
> Randy
> 
> 
> 
> ---------- Original Message -----------
> From: Martin Pycko <martinp at digium.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Tue, 29 Apr 2003 13:08:00 -0500 (CDT)
> Subject: Re: [Asterisk-Users] two X100P cards and one TDM400P
> 
> > /etc/zaptel.conf
> > fxsks=1-2
> > fxoks=3-6
> > defaultzone=us
> > loadzone=us
> > 
> > "modprobe wcfxo"
> > "modprobe wcfxs"
> > "ztcfg -vv"
> > 
> > /etc/asterisk/zapata.conf
> > [channels]
> > context=incoming
> > signalling=fxs_ks
> > group=1
> > channel => 1-2
> > context=internal
> > signalling=fxo_ks
> > group=2
> > channel => 3-6
> > 
> > Now in extensions.conf you can set up some extensions
> > in contexts: [incoming] and [internal] like this:
> > 
> > /etc/asterisk/extensions.conf
> > [incoming]
> > exten => s,1,Dial,Zap/3&Zap/4&Zap/5&Zap/6|20
> > exten => s,2,Congestion
> > 
> > [internal]
> > exten => _9X.,1,Dial,Zap/g1/${EXTEN:1}
> > exten => _100[0-3],1,Dial,Zap/$[${EXTEN} - 997]
> > 
> > Now you can dial out with 9 and call your phones with 1000,1001,1002
> > 
> > Martin
> > On Tue, 29 Apr 2003, Randy Smith wrote:
> > 
> > > > Do you have all 4 modules on TDM400P ?
> > >
> > > Yes.
> > >
> > > Randy
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> ------- End of Original Message -------
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>