[Asterisk-Users] Eicon BRI-card

[Jörg Bauer/Denic]

Try using the the chan_capi drivers.
I have such an installation here and it works fine.

(chan_capi is available at  http://www.junghanns.net/chan_capi.html(

asterisk-users-admin at lists.digium.com wrote on 22.04.2003 07:34:42:

> Hello,
> 
> I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M
> PCI" but I don´t get it to work. I´m running on RH8.0. The Eicon-
> card supports isdn4linux.
> 
> In the modem.conf file i have put following:
> -----------
> [interfaces]
> ; By default, incoming calls should come in on the "remote" context
> context=remote
> ; Modem Drivers to load
> driver=i4l
> ; Type of dialing
> dialtype=tone
> ; Mode selection.  "Immediate" means that as soon as you dial, 
> you're connected
> ; and the line is considered up.  "Ring" means we wait until the ring 
cadence
> ; occurs at least once.  "Answer" means we wait until the other end 
picks up.
> mode=immediate
> ;
> ; List all devices we can use.
> ; ISDN example
> device => /dev/ttyds
> -----------
> 
> But I don´t really know what to call the Eicon-card on the "device"-
> line (linux newbie).
> 
> Is there anyone that is getting an Eicon-card to work properly?
> 
> regards,
> ---Jan Mörn---
> ________________________________________________________
> This message is written with recycled letters.
> 
> Jan Mörn         PHONE: +358 (0)18 539 226
> IT-ingenjör         FAX: +358 (0)18 539 250
> Kraftnät Åland AB      GSM: +358 (0)40 8445 390
> PB 71, 22101 Mariehamn   E-MAIL: jan.morn at kraftnat.aland.fi
>             Web:   www.kraftnat.aland.fi
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

> ForwardSourceID:NT0003C6CA