[Asterisk-Users] How to make an X100P answer only one distinctivering cadence?

[Wade Weppler]

This thing seems to pick up the cadence on the first ring.  The second ring
is then pass through to the device.  CallerID also seems to passthru
properly.  I'll have to test it again, if anyone is interested.  I haven't
used it in a while, but it worked very well.

-wade


> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of TC
> Sent: Thursday, April 10, 2003 1:53 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] How to make an X100P answer only one
> distinctivering cadence?
> 
> 
> 
> >Another option is Aastra's Ring Selectors.  They can "split" a line into
> >multiple lines by ring cadence.
> >
> >http://www.aastra.com/Products/RingSelectors/index.html
> Don't you then have to wait 4 rings b4 an extension will get a * dial ?
> This devices must wait 2 rings to detect the cadence
> then * is gonna wait 2 rings trying to get CallerID which I think
> it will NEVER get since that comes from the CO line between the
> 1st & 2nd ring ???
> Or Will the device pass along the caller id when it rings through
> 
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users