[Asterisk-Users] can't use both controllers...

[Roy Sigurd Karlsbakk]

hi

when two calls are active on controller 2, chan_capi won't use controller 1.

this is with AVM C2

roy

    -- Executing Goto("SIP/torgeir-b476", "capiring|BYEXTENSION|1") in new 
stack
    -- Goto (capiring,90044875,1)
    -- Executing Dial("SIP/torgeir-b476", 
"CAPI/22545066:bBYEXTENSION|120|Ttr") in new stack
  == data = 22545066:b90044875
  == capi request omsn = 22545066
  == found capi with omsn = 22545066
  == idest = 22545066:b90044875 timeout = 0
  == doB3 = 0x1 dest = 90044875
  == creating pipe for PLCI=-1
  == sent CONNECT_REQ MN =0xc53d
  == received CONNECT_CONF PLCI = 0x302 INFO = 0
    -- Called 22545066:b90044875
  == DISCONNECT_IND PLCI=0x302 REASON=0x34a2
STATE = 0x5
    -- CAPI[contr2/] is busy
  == Everyone is busy at this time
NOTICE[7061521]: File chan_capi.c, Line 414 (capi_hangup): hangingup
    -- removed pipe for PLCI = 0x302
    -- Executing Dial("SIP/torgeir-b476", 
"CAPI/22545060:bBYEXTENSION|120|Ttr") in new stack
  == data = 22545060:b90044875
  == capi request omsn = 22545060
NOTICE[7061521]: File chan_capi.c, Line 884 (capi_request): didn't find capi 
device with outgoing msn = 22545060. you should check your config!
NOTICE[7061521]: File app_dial.c, Line 476 (dial_exec): Unable to create 
channel of type 'CAPI'
  == Everyone is busy at this time
WARNING[7061521]: File pbx.c, Line 1702 (ast_pbx_run): Timeout, but no rule 
't' in context 'capiring'
    -- Executing Goto("SIP/torgeir-7984", "capiring|BYEXTENSION|1") in new 
stack
    -- Goto (capiring,90044875,1)
    -- Executing Dial("SIP/torgeir-7984", 
"CAPI/22545066:bBYEXTENSION|120|Ttr") in new stack
  == data = 22545066:b90044875
  == capi request omsn = 22545066
  == found capi with omsn = 22545066
  == idest = 22545066:b90044875 timeout = 0
  == doB3 = 0x1 dest = 90044875
  == creating pipe for PLCI=-1
  == sent CONNECT_REQ MN =0xc89c
    -- Called 22545066:b90044875
  == received CONNECT_CONF PLCI = 0x302 INFO = 0
  == DISCONNECT_IND PLCI=0x302 REASON=0x34a2
    -- CAPI[contr2/] is busy
  == Everyone is busy at this time
NOTICE[7077905]: File chan_capi.c, Line 414 (capi_hangup): hangingup
    -- removed pipe for PLCI = 0x302
    -- Executing Dial("SIP/torgeir-7984", 
"CAPI/22545060:bBYEXTENSION|120|Ttr") in new stack
  == data = 22545060:b90044875
  == capi request omsn = 22545060
NOTICE[7077905]: File chan_capi.c, Line 884 (capi_request): didn't find capi 
device with outgoing msn = 22545060. you should check your config!
NOTICE[7077905]: File app_dial.c, Line 476 (dial_exec): Unable to create 
channel of type 'CAPI'
  == Everyone is busy at this time
STATE = 0x5
"capidrit" 51L, 2488C                                                                                                             
1,5           Top

-- 
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356

Computers are like air conditioners.
They stop working when you open Windows.