[channels]
context = ss7_ceysa
signalling=ss7
ss7type = itu
linkset = 1
ss7_initialhwblo=no

echocancel=yes
echocancelwhenbridged=yes
echotraining=no
ss7_use_echocontrol=no
ss7_default_echocontrol=yes

usecallerid=yes
hidecallerid=no
;callwaiting=yes
usecallingpres=yes
;callwaitingcallerid=yes
;threewaycalling=yes
;transfer=yes
;canpark=yes
cancallforward=no
callreturn=no
relaxdtmf=yes
rxgain=0.0
txgain=0.0

nocharge_ind=yes
inf_in_band=no
ss7_calling_nai=dynamic ;dynamic ;NAI for incoming calls
ss7_called_nai=dynamic ;NAI for outgoing calls
networkindicator = national
ss7_internationalprefix=00 ;international prefix value for incoming calls
ss7_nationalprefix=0 ;national prefix value for incoming calls
ss7_subscriberprefix= ;subscriber prefix value for incoming calls
ss7_networkroutedprefix=
ss7_unknownprefix= ;unknown prefix value for incoming calls

; This option is used to disable automatic sending of ACM when the call is started
; in the dialplan.  If you do use this option, you will need to use the Proceeding()
; application in the dialplan to send ACM.
ss7_explicitacm=yes
;switchtype=national;es para pri
pointcode = 20
adjpointcode = 10
defaultdpc = 10

slc=0
sigchan=16
;sigchan=47

mtp3_timer.q707_t1=4000
mtp3_timer.q707_t2=30000
mtp3_timer.t1=500
mtp3_timer.t2=700
mtp3_timer.t3=500
mtp3_timer.t4=500
mtp3_timer.t5=500
mtp3_timer.t6=500
mtp3_timer.t10=60000
mtp3_timer.t12=800
mtp3_timer.t13=800
mtp3_timer.t14=2000
mtp3_timer.t19=67000
mtp3_timer.t21=3000
mtp3_timer.t22=300000
mtp3_timer.t23=300000
inr_if_no_calling=yes
non_isdn_access=no
isup_timer.t1=30000
isup_timer.t2=180000
isup_timer.t5=300000
isup_timer.t6=90000
isup_timer.t7=20000
isup_timer.t8=10000
isup_timer.t12=15000
isup_timer.t13=300000
isup_timer.t14=15000
isup_timer.t15=300000
isup_timer.t16=15000
isup_timer.t17=300000
isup_timer.t18=15000
isup_timer.t19=300000
isup_timer.t20=15000
isup_timer.t21=60000
isup_timer.t22=15000
isup_timer.t23=90000
isup_timer.t27=240000
isup_timer.t33=12000
isup_timer.t35=5000
isup_timer.digittimeout = 5000

;hacerlo asi, con los canales separados y dos cicbeginswith with para respetar como cuenta los cics la central

group=1
cicbeginswith=1
channel => 1-15
cicbeginswith=17
channel => 17-31

;cicbeginswith=33
;channel => 32-46
;cicbeginswith=49
;channel => 48-62