<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">Hi,<br>
<br>
You cannot have two STPs on a single link. This is not how
MTP2/MTP3 works.<br>
<br>
I think that you mean that on the first E1 you have an STP on for
example timeslot 16 and on the second E1 as well and you need a
configuration to allows this?<br>
<br>
YOUR MGW (PC4) ====> port 1: ===> STP1 (PC2) ===> carrier
MGW (PC 1)<br>
\====> port 2: ===> STP2 (PC3)
==/<br>
<br>
If so:<br>
<br>
;;<br>
;; Linkset for STP signalling <br>
;;<br>
<br>
[linkset-STP_A]<br>
enabled => yes<br>
hunting_policy => even_mru<br>
context => invalid<br>
enable_st => yes<br>
use_connect => no<br>
subservice => auto<br>
opc => {your point code}<br>
dpc => {stp point code}<br>
loadshare => combined<br>
combined => set-STP<br>
<br>
[link-STP_A]<br>
enabled => yes<br>
linkset => STP_A<br>
channels =><br>
schannel => 16<br>
sls => 0<br>
enabled => yes<br>
sltm => yes<br>
<br>
[linkset-STP_B]<br>
enabled => yes<br>
hunting_policy => even_mru<br>
context => invalid<br>
enable_st => yes<br>
use_connect => no<br>
subservice => auto<br>
opc => {your point code}<br>
dpc => {stp point code}<br>
loadshare => combined<br>
combined => set-STP<br>
<br>
[link-STP_B]<br>
enabled => yes<br>
linkset => STP_B<br>
channels =><br>
schannel => 16<br>
sls => 0<br>
enabled => yes<br>
sltm => yes<br>
<br>
;;<br>
;; Linkset for MGW <br>
;;<br>
<br>
[linkset-MGW]<br>
enabled => yes<br>
enable_st => yes<br>
use_connect => no<br>
hunting_policy => even_mru<br>
context => MGW-inbound<br>
language => nl<br>
subservice => auto<br>
loadshare => combined<br>
combined =>set-STP<br>
opc => {your point code}<br>
dpc => {media gateway point code}<br>
<br>
[link-MGW-1]<br>
linkset => MGW<br>
channels => 1-15,17-31<br>
schannel =><br>
firstcic => 1<br>
enabled => yes<br>
<br>
[link-MGW-2]<br>
linkset => MGW<br>
channels => 1-15,17-31<br>
schannel =><br>
firstcic => 33<br>
enabled => yes<br>
<br>
[host-mgw]<br>
enabled => yes<br>
default_linkset => MGW<br>
links => STP_A:1,MGW-1:1,STP_B:2,MGW-2:2<br>
<br>
Kind regards,<br>
Matthias van der Vlies<br>
<br>
On 06/22/2017 06:25 PM, Rafael dos Santos Saraiva wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAPgnSsme9JtmJ7eFdd-MwthWk1fbW+Cv-zYQ8YN330kxz2-1mw@mail.gmail.com">
<div dir="ltr">Hi
<div><br>
</div>
<div>Is it possible using two or more stp in a link using
chan_ss7?</div>
<div><br>
</div>
<div>I tried two ways of this:</div>
<div><br>
</div>
<div>;comma separated</div>
<div>stp => 123,456</div>
<div><br>
</div>
<div>;one per line</div>
<div>stp => 123<br>
</div>
<div>stp => 456</div>
<div><br>
</div>
<div>What's is correct? Or is not possible?</div>
<div><br>
</div>
<div>Thanks in advance<br clear="all">
<div><br>
</div>
-- <br>
<div class="gmail_signature" data-smartmail="gmail_signature">
<div dir="ltr">
<div>
<div>Att,</div>
<div>Rafael Saraiva</div>
</div>
</div>
</div>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
</blockquote>
<p><br>
</p>
</body>
</html>