<p>Hi thank you for your fast answer.<br>
Its about carrier pre selection eg i make a call from an external phone (not connected to the server) with our cpc like 1234.</p>
<p>12340041441234567</p>
<p>The Call will be routet to our server from the provider. They have enbloc enabled.</p>
<p>Dialplan is like exten => _12340041xxxxxxxxxx (for switzerland and i know digits lenght)</p>
<p>Its the # key because of the enbloc from our Provider?</p>
<p>Greetings,</p>
<p>Simon</p>
<div class="gmail_quote">Am 02.03.2012 20:37 schrieb <<a href="mailto:florian@gruendler.net">florian@gruendler.net</a>>:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Define "callbycall" number. What is the callflow?<br>
Accepted where, by what equipment?<br>
Are you trying to describe something which has to do with overlap vs. enbloc<br>
dialing in a call-through scenario with digit collection on Asterisk or is<br>
this a one stage call where the call enters and leaves Asterisk in one go?<br>
By what means is this ISDN phone connected to the Asterisk machine?<br>
How does the dialplan look like?<br>
<br>
<br>
<br>
> -----Ursprüngliche Nachricht-----<br>
> Von: <a href="mailto:asterisk-ss7-bounces@lists.digium.com">asterisk-ss7-bounces@lists.digium.com</a> [mailto:<a href="mailto:asterisk-ss7-">asterisk-ss7-</a><br>
> <a href="mailto:bounces@lists.digium.com">bounces@lists.digium.com</a>] Im Auftrag von Simon Handschin<br>
> Gesendet: Freitag, 2. März 2012 20:07<br>
> An: <a href="mailto:asterisk-ss7@lists.digium.com">asterisk-ss7@lists.digium.com</a><br>
> Betreff: [asterisk-ss7] chan_ss7 incoming callbycall call problems<br>
><br>
> Hello everyone.<br>
><br>
> I have a problem. I have a callbycall number routet to our E1 Server.<br>
> If i Dial from my ISDN Phone to this callbycall number the call only get<br>
> acceptet if i press # key. Normal dial in and out works on our server just<br>
if<br>
> dial with call by call it did not work.<br>
><br>
> I Use<br>
><br>
> Sangoma A104 Card (Only 1 Port is Used)<br>
><br>
> Asterisk 1.8.9.3<br>
> Dahdi 2.6<br>
> chan_ss7 2.1.0<br>
> Wanpipe 3.5.25<br>
><br>
> dahdi systems.conf<br>
><br>
> #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit #autogenrated on<br>
> 2012-03-02 #Dahdi Channels Configurations #For detailed Dahdi options,<br>
view<br>
> /etc/dahdi/system.conf.bak loadzone=de defaultzone=de<br>
><br>
> #Sangoma A104 port 1 [slot:3 bus:13 span:1] <wanpipe1><br>
> span=1,0,0,ccs,hdb3,crc4<br>
> bchan=1-31<br>
> echocanceller=mg2,2-31<br>
> #hardhdlc=1<br>
><br>
> wanpipe1.conf<br>
><br>
><br>
> #================================================<br>
> # WANPIPE1 Configuration File<br>
> #================================================<br>
> #<br>
> # Date: Wed Dec 6 20:29:03 UTC 2006<br>
> #<br>
> # Note: This file was generated automatically<br>
> # by /usr/local/sbin/setup-sangoma program.<br>
> #<br>
> # If you want to edit this file, it is<br>
> # recommended that you use wancfg program<br>
> # to do so.<br>
> #================================================<br>
> # Sangoma Technologies Inc.<br>
> #================================================<br>
><br>
> [devices]<br>
> wanpipe1 = WAN_AFT_TE1, Comment<br>
><br>
> [interfaces]<br>
> w1g1 = wanpipe1, , TDM_VOICE, Comment<br>
><br>
> [wanpipe1]<br>
> CARD_TYPE = AFT<br>
> S514CPU = A<br>
> CommPort = PRI<br>
> AUTO_PCISLOT = NO<br>
> PCISLOT = 3<br>
> PCIBUS = 13<br>
> FE_MEDIA = E1<br>
> FE_LCODE = HDB3<br>
> FE_FRAME = CRC4<br>
> FE_LINE = 1<br>
> TE_CLOCK = MASTER<br>
> TE_REF_CLOCK = 0<br>
> TE_SIG_MODE = CCS<br>
> TE_HIGHIMPEDANCE = NO<br>
> TE_RX_SLEVEL = 430<br>
> HW_RJ45_PORT_MAP = DEFAULT<br>
> LBO = 120OH<br>
> FE_TXTRISTATE = NO<br>
> MTU = 1500<br>
> UDPPORT = 9000<br>
> TTL = 255<br>
> IGNORE_FRONT_END = NO<br>
> TDMV_SPAN = 1<br>
> TDMV_DCHAN = 0<br>
> TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS<br>
> Blue Alarm and keep line down<br>
> #wanpipemon -i w1g1 -c Ttx_ais_off to<br>
disable<br>
> AIS maintenance mode<br>
> #wanpipemon<br>
-i w1g1 -c<br>
> Ttx_ais_on to enable AIS maintenance mode<br>
> TDMV_HW_DTMF = NO # YES: receive dtmf events from<br>
hardware<br>
> TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz<br>
events from<br>
> hardware<br>
> HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation<br>
> enabled with nlp (default)<br>
><br>
# OCT_SPEECH:<br>
> improves software tone detection by disabling NLP (echo possible)<br>
><br>
#<br>
> OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.<br>
> HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of<br>
> incoming media (must have hwdtmf enabled)<br>
> HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on<br>
> the line - could break fax<br>
> HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic<br>
> echo cancelation<br>
> HWEC_NLP_DISABLE = NO # NO: default YES: guarantees<br>
> software tone detection (possible echo)<br>
> HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio<br>
> level to be maintained (-20 default)<br>
> HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio<br>
> level to be maintained (-20 default)<br>
> HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to<br>
be<br>
> applied to tx signal<br>
> HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to<br>
be<br>
> applied to tx signal<br>
><br>
> [w1g1]<br>
> ACTIVE_CH = ALL<br>
> TDMV_HWEC = NO<br>
> MTU = 8<br>
><br>
><br>
> ss7.conf<br>
><br>
> [linkset-siuc]<br>
> enabled => yes<br>
> enable_st => no<br>
> use_connect => no<br>
> hunting_policy => even_mru<br>
> context => ss7<br>
> language => de<br>
> t35 => 4000,st<br>
> subservice => auto<br>
> variant => ITU<br>
><br>
><br>
> [link-l1]<br>
> linkset => siuc<br>
> channels => 2-31<br>
> schannel => 1<br>
> firstcic => 1<br>
> enabled => yes<br>
> sltm => no<br>
> sls=0<br>
> echocancel => no<br>
> echocan_train => 350<br>
> echocan_taps => 128<br>
><br>
> [host-SS7-1]<br>
> if-1 => 10.1.40.71<br>
> enabled => yes<br>
> opc => 1601<br>
> dpc => siuc:300<br>
> links => l1:1 ;span 1 of dahdi/system.conf<br>
> ;globaltitle => 0x00, 0x03, 0x01, 7773<br>
> ssn => 7<br>
><br>
><br>
> Anyone got an idea about this?<br>
><br>
> Greetings<br>
><br>
> Simon<br>
><br>
> --<br>
> _____________________________________________________________________<br>
> -- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
><br>
> asterisk-ss7 mailing list<br>
> To UNSUBSCRIBE or update options visit:<br>
> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br>
<br>
<br>
--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-ss7 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br>
</blockquote></div>