<h1 class="ha"><font class="Apple-style-span" face="arial, helvetica, sans-serif" size="2" style="font-weight: normal;">hello,<br>
<br>
we have an sangoma AFT104 card installed on asterisk box connected to<br>
alcatel switch via ss7.<br>
we use asterisk box for db lookup; call enters asterisk box then<br>
an agi script performs some db lookups then returns call to alcatel<br>
with a single command like this:<br>
EXEC Dial DAHDI/g1/81B01XXXXXXXXXX<br>
<br>
the problem is chan_dahdi & libss7 cannot send alphanumeric extension<br>
to alcatel.<br>
in alcatel "B01" seen as "001".<br>
is there any way to send alphanumeric extension over ss7 with<br>
chan_dahdi & libss7.<br>
thanks<br>
<br>
huseyin<br>
<br>
software versions:<br>
<br>
Linux voip2 2.6.38-8-server #42-Ubuntu SMP Mon Apr 11 03:49:04 UTC<br>
2011 x86_64 x86_64 x86_64 GNU/Linu<br>
wanpipe-3.5.23<br>
dahdi-linux-complete-2.5.0.1+2.5.0.1<br>
libpri-1.4.12<br>
libss7-1.0.2<br>
asterisk-1.6.2.20 & asterisk-1.8.6.0<br>
<br>
<br>
confs are:<br>
<br>
wanpipe1.conf<br>
[devices]<br>
wanpipe1 = WAN_AFT_TE1, Comment<br>
<br>
[interfaces]<br>
w1g1 = wanpipe1, , TDM_VOICE, Comment<br>
<br>
[wanpipe1]<br>
CARD_TYPE = AFT<br>
S514CPU = A<br>
CommPort = PRI<br>
AUTO_PCISLOT = NO<br>
PCISLOT = 4<br>
PCIBUS = 8<br>
FE_MEDIA = E1<br>
FE_LCODE = HDB3<br>
FE_FRAME = NCRC4<br>
FE_LINE = 1<br>
TE_CLOCK = NORMAL<br>
TE_REF_CLOCK = 0<br>
TE_SIG_MODE = CCS<br>
TE_HIGHIMPEDANCE = NO<br>
TE_RX_SLEVEL = 430<br>
LBO = 120OH<br>
FE_TXTRISTATE = NO<br>
MTU = 1500<br>
UDPPORT = 9000<br>
TTL = 255<br>
IGNORE_FRONT_END = NO<br>
TDMV_SPAN = 1<br>
TDMV_DCHAN = 0<br>
TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS<br>
Blue Alarm and keep line down<br>
#wanpipemon -i w1g1 -c Ttx_ais_off to<br>
disable AIS maintenance mode<br>
<br>
#wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode<br>
TDMV_HW_DTMF = NO # YES: receive dtmf events from hardware<br>
TDMV_HW_FAX_DETECT = NO # YES: receive fax<br>
1100hz events from hardware<br>
HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation<br>
enabled with nlp (default)<br>
<br>
# OCT_SPEECH: improves software tone detection by disabling<br>
NLP (echo possible)<br>
<br>
# OCT_NO_ECHO:disables echo cancelation but allows VQE/tone<br>
functions.<br>
HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of<br>
incoming media (must have hwdtmf enabled)<br>
HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on<br>
the line - could break fax<br>
HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic<br>
echo cancelation<br>
HWEC_NLP_DISABLE = NO # NO: default YES: guarantees<br>
software tone detection (possible echo)<br>
HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio<br>
level to be maintained (-20 default)<br>
HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio<br>
level to be maintained (-20 default)<br>
HWEC_TX_GAIN = 0 # 0: disable -24-24: db<br>
values to be applied to tx signal<br>
HWEC_RX_GAIN = 0 # 0: disable -24-24: db<br>
values to be applied to tx signal<br>
<br>
[w1g1]<br>
ACTIVE_CH = ALL<br>
TDMV_HWEC = NO<br>
MTU = 8<br>
<br>
dahdi system.conf<br>
<br>
#Sangoma A104 port 1 [slot:4 bus:8 span:1] <wanpipe1><br>
span=1,1,0,ccs,hdb3<br>
bchan=1-15,17-31<br>
mtp2=16<br>
<br>
chan_dahdi.conf<br>
<br>
[trunkgroups]<br>
<br>
[channels]<br>
switchtype=euroisdn<br>
priindication=inband<br>
context=page<br>
usecallerid=yes<br>
hidecallerid=no<br>
callwaiting=yes<br>
usecallingpres=yes<br>
callwaitingcallerid=yes<br>
threewaycalling=yes<br>
transfer=yes<br>
canpark=yes<br>
cancallforward=yes<br>
callreturn=yes<br>
echocancel=no<br>
echocancelwhenbridged=no<br>
relaxdtmf=yes<br>
rxgain=0.0<br>
txgain=0.0<br>
group=1<br>
callgroup=1<br>
pickupgroup=1<br>
immediate=no<br>
<br>
<br>
<br>
group=1<br>
context=alcatel<br>
signaling=ss7<br>
ss7type=itu<br>
linkset=1<br>
pointcode=5555<br>
adjpointcode=11264<br>
defaultdpc=11264<br>
networkindicator=national<br>
sigchan=16<br>
<br>
echocancel=no<br>
ss7_called_nai=dynamic<br>
ss7_calling_nai=dynamic<br>
;ss7_internationalprefix=00<br>
;ss7_nationalprefix=0<br>
ss7_explictacm=yes<br>
ss7_autoacm=yes<br>
ss7_use_echocontrol=no<br>
ss7_default_echocontrol=0<br>
cicbeginswith=1<br>
channel=1-15<br>
cicbeginswith=17<br>
channel=17-31</font></h1>