<div>Setup is 2 Digium TE420 card but currently only 2nd card is being used with 3 E1s connected </div>
<div>
<div>Signalling is on 16th channel </div>
<div> </div></div>
<div>sigchan = 140<br>mtp2 = 140<br></div>
<div>;Span 2, Port 1<br>cicbeginswith = 1<br>channel=> 125-139<br>cicbeginswith = 17<br>channel=> 141-155<br>cicbeginswith = 32<br>channel=> 156-170<br>cicbeginswith = 48<br>channel=> 172-186<br>cicbeginswith = 63<br>
channel=> 187-201<br>cicbeginswith = 79<br>channel=> 203-217<br></div>
<div>dahdi system.conf:</div>
<div> </div>
<div>span=1,1,0,ccs,hdb3<br># termtype: te<br>bchan=1-15,17-31<br>mtp2=16<br>echocanceller=mg2,1-15,17-31</div>
<div># Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"<br>span=2,1,0,ccs,hdb3<br># termtype: te<br>bchan=32-46,48-62<br>#dchan=47<br>#mtp2 = 47<br>echocanceller=mg2,32-46,48-62</div>
<div># Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"<br>span=3,1,0,ccs,hdb3<br># termtype: te<br>bchan=63-77,79-93<br>#dchan=78<br>#mtp2 = 78<br>echocanceller=mg2,63-77,79-93</div>
<div># Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"<br>span=4,0,0,ccs,hdb3<br># termtype: te<br>bchan=94-108,110-124<br>#dchan=109<br>echocanceller=mg2,94-108,110-124<br></div>
<div> </div>
<div># Span 5: TE4/1/1 "T4XXP (PCI) Card 1 Span 1"<br>span=5,1,0,ccs,hdb3<br># termtype: te<br>bchan=125-139,141-155<br>#dchan=140<br>mtp2=140<br>echocanceller=mg2,125-139,141-155</div>
<div># Span 6: TE4/1/2 "T4XXP (PCI) Card 1 Span 2"<br>span=6,1,0,ccs,hdb3<br># termtype: te<br>bchan=156-170,172-186<br>#dchan=171<br>echocanceller=mg2,156-170,172-186</div>
<div># Span 7: TE4/1/3 "T4XXP (PCI) Card 1 Span 3"<br>span=7,1,0,ccs,hdb3<br># termtype: te<br>bchan=187-201,203-217<br>#dchan=202<br>echocanceller=mg2,187-201,203-217</div>
<div># Span 8: TE4/1/4 "T4XXP (PCI) Card 1 Span 4"<br>span=8,8,0,ccs,hdb3<br># termtype: te<br>bchan=218-232,234-248<br>#dchan=233<br>echocanceller=mg2,218-232,234-248<br></div>
<div>Can someone help me verify if my CIC to BCHAN mapping is correct? We're using the 2nd Card (hence Span5 starting) and there's only 1 signalling channel currently (but could be more in the future). Here's example of two calls</div>
<div> </div>
<div> -- Accepting call to 'xxxxx' on CIC 27<br> -- Executing [..... Dial("DAHDI/151-1", "IAX2/....</div>
<div> -- Called ...</div>
<div> -- Call accepted ...</div>
<div> -- Format for call is gsm<br> -- IAX2/XXXX is proceeding passing it to DAHDI/151-1<br> -- IAX2/XXXX answered DAHDI/151-1<br></div>
<div> -- Accepting call CIC 51<br> -- Call accepted </div>
<div> -- IAX2/XXXX is proceeding passing it to DAHDI/175-1<br> -- IAX2/XXXX answered DAHDI/175-1<br><br clear="all"><br></div>