<div> </div>
<div>Estimado, </div>
<div> </div>
<div>looking at the traces ,the incoming call is directed to : 002010700</div>
<div>the outgoing cal is originated from : ANI=20107000 going to: DNI=888917571 </div>
<div> </div>
<div>you may want to dial in the same format than the call is received, 00888917571 - ie not removing a leading zero, but adding two !</div>
<div>you may also want to add the 00 to the calling number, so you get the exact same format.</div>
<div> </div>
<div>these are just wild guesses !</div>
<div> </div>
<div>J.<br><br></div>
<div class="gmail_quote">On Thu, Mar 18, 2010 at 2:22 PM, Jorge Antillon <span dir="ltr"><<a href="mailto:jantillon@ticom.co.cr">jantillon@ticom.co.cr</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex" class="gmail_quote">
<div>First is first,<br>I am amazed of all the support I have received, so thank you.<br><br>Second,<br>How do I remove the leading 0 and where is it!!,<br><br>I am setup as national, and supposedly I cannot and should not be anything else.<br>
<br>They just looked at a protocol analyzer and they said my ANI and DNI were correct.<br><br>Here pasted my screens<br>[Mar 18 11:37:17] NOTICE[11742]: isup.c:495 decode_isup_phonenum: National (significant) or unknown nature of address indicator (1), assuming international.<br>
-- Recv IAM CIC=13 ANI=***** DNI=0020107000 RNI= redirect=no/0 complete=0<br> -- Executing [0020107000@congestion:1] Answer("SS7/ls1/13", "") in new stack<br> -- Executing [0020107000@congestion:2] Dial("SS7/ls1/13", "SIP/voice01/2001") in new stack<br>
-- Called voice01/2001<br> -- SIP/voice01-00000004 is ringing<br> -- SIP/voice01-00000004 answered SS7/ls1/13<br> == Spawn extension (congestion, 0020107000, 2) exited non-zero on 'SS7/ls1/13'<br> -- SS7 hangup 'SS7/ls1/13' CIC=13 Cause=16 (state=7)<br>
<br>Inbound completed correctly.<br>---------------------------------------------------------<br> -- Executing [22564401@ss7:3] Hangup("SIP/voice01-00000005", "") in new stack<br> == Spawn extension (ss7, 22564401, 3) exited non-zero on 'SIP/voice01-00000005'<br>
-- Executing [22560144@ss7:1] Set("SIP/voice01-00000006", "CALLERID(all)=20107000") in new stack<br> -- Executing [22560144@ss7:2] Dial("SIP/voice01-00000006", "SS7/22560144") in new stack<br>
-- Sent IAM CIC=9 ANI=20107000 DNI=22560144 RNI=<br> -- Called 22560144<br> -- SS7 hangup 'SS7/ls1/9' CIC=9 Cause=3 (state=7)<br> == Everyone is busy/congested at this time (1:0/0/1)<br> -- Executing [22560144@ss7:3] Hangup("SIP/voice01-00000006", "") in new stack<br>
== Spawn extension (ss7, 22560144, 3) exited non-zero on 'SIP/voice01-00000006'<br><br>Outbound to fixed line, congestion right away.<br>---------------------------------------------------------<br> -- Executing [888917571@ss7:1] Set("SIP/voice01-00000008", "CALLERID(all)=20107000") in new stack<br>
-- Executing [888917571@ss7:2] Dial("SIP/voice01-00000008", "SS7/888917571") in new stack<br> -- Sent IAM CIC=17 ANI=20107000 DNI=888917571 RNI=<br> -- Called 888917571<br> -- SS7/ls1/17 is ringing<br>
-- SS7/ls1/17 is making progress passing it to SIP/voice01-00000008<br> -- SS7 hangup 'SS7/ls1/17' CIC=17 Cause=0 (state=4)<br> == Spawn extension (ss7, 888917571, 2) exited non-zero on 'SIP/voice01-00000008'<br>
<br>Outbound to mobile, answers that I have am dialing the wrong number
<div class="im"><br><br><br><br><br>
<table cellspacing="0" cellpadding="0" width="100%">
<tbody>
<tr>
<td><br>
<table cellspacing="0" width="195">
<tbody>
<tr>
<td><img border="0" align="middle" src="cid:1268936125.13745.15.camel@Doughnut" width="44" height="48"> </td>
<td>Jorge Antillon<br>CEO - CTO<br>ticom - Costa Rica Telecom </td></tr></tbody></table><br><br><br><br><br></td></tr></tbody></table></div>
<div>
<div></div>
<div class="h5">On Thu, 2010-03-18 at 14:09 -0400, Jean Cérien wrote: <br>
<blockquote type="CITE"> <br>I've had something similar with a AXE 10 E/// switch. I had to remove the leading 0 when dialing - ie this was a dialing formatting issue.<br> <br>May not be your case, but who knows !<br>
<br>Rgds, <br>J.<br><br><br> <br>On Thu, Mar 18, 2010 at 2:00 PM, Jan Berger <<a href="mailto:janvb@live.com" target="_blank">janvb@live.com</a>> wrote:<br>
<blockquote>Jorge,<br> <br>Firstly - don't take for granted that the message you are played by the switch indicate the correct problem - are the circuits on your E1's opene for outbound calls at the switch?<br> <br>
What I would do is to ask the network how they expeect thee numbr and NAI set. If that is not possible then I fear you have to start testing from one end to another A-Z. I usually end up doing this myself even inside neetworks because it's so slow getting answers from some networks.<br>
<br>Etc - assume you want to call 93452302 - just an example Norwgian number<br> <br>1. try 93452302 in National<br>2. try 093452302 in National<br>3. try 004793452302 in National<br><br>4. try 93452302 in Unknown<br>5. try 093452302 in Unknown<br>
6. try 004793452302 in Unknown<br><br>7. try 93452302 in International<br>8. try 093452302 in International<br>9. try 004793452302 in International<br> <br>Jan<br>
<hr>
<br><br>From: <a href="mailto:jantillon@ticom.co.cr" target="_blank">jantillon@ticom.co.cr</a><br>To: <a href="mailto:asterisk-ss7@lists.digium.com" target="_blank">asterisk-ss7@lists.digium.com</a><br>Date: Thu, 18 Mar 2010 09:31:05 -0600<br>
Subject: [asterisk-ss7] SS7 Costa Rica <br><br><br><br>Hi,<br> <br> I've been trying to setup SS7 completely down here in Costa Rica for a week now and I am thinking I've run out of resources, we are the first interconnect and pretty much have no other way to look out for help.<br>
I have 20 E1s with the operator and while I see Idle channels and I am capable of receiving a call, answering it and processing it, when trying to place an outbound call it is not being able to complete, what we get is a recoding system from the operator saying that the number is incorrect (perhaps the nature-of-address, translation or numbering plan).<br>
<br> I have included my config files for reference.<br> I've moved forward with the case by fiddling with the globaltitle / ssn setting, as to changing its four fields, but I have no idea of all of the possible values and their effect.<br>
<br> ss7.conf<br> --------------------------------------------------<br> [linkset-ls1]<br> enabled => yes<br> enable_st => yes<br> use_connect => no<br> hunting_policy => odd_lru ;seq_lth<br>
context => congestion<br> language => en<br> t35 => 15000,timeout<br> subservice => auto<br> variant => ITU<br> <br> [link-l1]<br> linkset => ls1<br>
channels => 1-30<br> schannel => 31<br> firstcic => 1<br> enabled => yes<br> echocancel => allways<br> echocan_train => 350<br> echocan_taps => 128<br>
<br> [link-l2]<br> linkset => ls1<br> channels => 1-30<br> schannel => 31<br> firstcic => 33<br> enabled => yes<br> <br> [link-l3]<br> linkset => ls1<br>
channels => 1-31<br> schannel =><br> firstcic => 65<br> enabled => yes<br> <br> [link-l4]<br> linkset => ls1<br> channels => 1-31<br> schannel =><br>
firstcic => 97<br> enabled => yes<br> <br> [host-SJO_P0BX_01]<br> enabled => yes<br> opc => 0x601<br> dpc => ls1:0x103<br> links => l1:1,l2:2,l3:3,l4:4<br>
globaltitle => 0x01, 0x01, 0x00, 4702636074<br> ssn => 0<br> -------------------------------------------------------------------<br>
<table cellspacing="0" cellpadding="0" width="100%">
<tbody>
<tr>
<td><br>
<table cellspacing="0" width="195">
<tbody>
<tr>
<td><img border="0" align="middle" src="cid:1268926265.12567.13.camel@Doughnut" width="44" height="48"> </td>
<td>Jorge Antillon<br>CEO - CTO<br>ticom - Costa Rica Telecom </td></tr></tbody></table><br><br><br><br><br><br></td></tr></tbody></table><br><br>
<hr>
<br><br>Hotmail: Trusted email with powerful SPAM protection. <a href="https://signup.live.com/signup.aspx?id=60969" target="_blank">Sign up now.</a> <br><br>--<br>_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com/" target="_blank">http://www.api-digital.com</a> --<br><br>asterisk-ss7 mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a> <br>
</blockquote><br></blockquote></div></div></div></blockquote></div><br>