Hi, I have this error<br><br>mtp.c:517 t2_timeout: MTP2 timer T2 timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial alignment failed on link 'i1'.<br><br>My Confs are:<br>
---------------- ss7.conf: --------------------<br>[linkset-a1]<br>enabled => yes<br>enable_st => no<br>use_connect => no<br>hunting_policy => seq_lth<br>context => ss7<br>language => br<br>subservice => 8<br>
<br>[link-i1]<br>linkset => a1<br>channels => 1-15,17-31<br>schannel => 16<br>firstcic => 1<br>enabled => yes<br>echocancel => allways<br><br>[host-a1]<br>enabled => yes<br>opc => 4<br>dpc => a1:13156<br>
links => i1:1<br><br>---------------- zaptel.conf ----------------<br>span=1,1,0,ccs,hdb3,crc4<br>loadzone = us<br>bchan=1-15,17-31<br>dchan=16<br><br><br><br>------------ console ---------------------<br>*CLI> ss7 link status<br>
linkset a1, link i1, schannel 16, sls 0, NOT_ALIGNED, rx: 0, tx: 4/4, sentseq/lastack: 127/127, total 2253619, 29387712<br><br>*CLI> ss7 linestat<br>Linkset: a1<br>CIC 1 Idle Reset pending<br>CIC 2 Idle Reset pending<br>
....................<br>................<br>CIC 31 Idle Reset pending<br><br><br><br><br>