<div>it must work on 8 or more E1's</div>
<div> </div>
<div>only thing is to get the signalling server from all the system and using cluster</div>
<div> </div>
<div>-Vashkar<br><br></div>
<div class="gmail_quote">On Fri, Jul 17, 2009 at 3:28 AM, Nyamul Hassan <span dir="ltr"><<a href="mailto:mnhassan@usa.net">mnhassan@usa.net</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex" class="gmail_quote">Hi Antoine,<br><br>Did you get around to using this setup with full 8 E1s?<br><br>It would be very helpful if you could post your results.<br>
<br>Regards<br><font color="#888888">HASSAN<br></font>
<div>
<div></div>
<div class="h5"><br><br>On Wed, Apr 8, 2009 at 2:22 AM, Antoine Megalla<<a href="mailto:aatef@rocketmail.com">aatef@rocketmail.com</a>> wrote:<br>><br>> Thank you Anders,<br>><br>> It seems like it is working now.<br>
> Although I could not test with the full 8 E1s, but I tested on 2 E1s, one in each server and it is working.<br>><br>> When I test with the 8 E1s I will report back.<br>><br>> Thank you and best regards,<br>
><br>> Antoine Megalla.<br>><br>><br>><br>> ----- Original Message ----<br>> From: Anders Baekgaard <<a href="mailto:ab@dicea.dk">ab@dicea.dk</a>><br>> To: <a href="mailto:asterisk-ss7@lists.digium.com">asterisk-ss7@lists.digium.com</a><br>
> Sent: Thursday, April 2, 2009 3:05:25 PM<br>> Subject: Re: [asterisk-ss7] chan_ss7 signalling across multiple servers<br>><br>> The config spec looks correct.<br>><br>> You will not need a [cluster] section when you use mtp3d to transport<br>
> signaling for multiple servers.<br>><br>> You can also configure a cluster using the [cluster] section, and then not use<br>> mtp3d. There is a template ss7.conf for that in the source distribution.<br>><br>
> The method of configuring clusters using the [cluster] section is the old<br>> approach. The newer approach of using mtp3d was introduced as a step towards<br>> supporting SIGTRAN, and for support of sharing transport for other protocols<br>
> like GSM MAP and INAP.<br>><br>> Best regards,<br>> --<br>> Anders Baekgaard<br>> Managing Director, Dicea ApS<br>> Esromgade 15, 1110<br>> DK-2200 Copenhagen N<br>> Denmark<br>> Tel: +45 46931411<br>
> Fax: +45 46931466<br>> Mobile: +45 20771844<br>><br>> On Thursday 02 April 2009 14:03:00 Antoine Megalla wrote:<br>>> Hi,<br>>><br>>> So I wrote 1 ss7.conf for both servers as suggested, I just need comments<br>
>> if the file looks correct, or if it missing anything: Do I need a [cluster]<br>>> section in the file:<br>>><br>>> Here is my ss7.conf file:<br>>><br>>> [linkset-MSC1]<br>>> enabled => yes<br>
>> enable_st => no<br>>> use_connect => yes<br>>> hunting_policy => seq_htl<br>>> subservice => auto<br>>> context => ss7<br>>> language => en<br>>> t35 => 15000,timeout<br>
>><br>>> [link-l1]<br>>> linkset => MSC1<br>>> channels => 1-15,17-31<br>>> schannel => 16,host1:12000<br>>> firstcic => 1<br>>> echocancel => no<br>>> echocan_train => 350<br>
>> echocan_taps => 128<br>>> enabled => yes<br>>><br>>> [link-l2]<br>>> linkset => MSC1<br>>> channels => 1-31<br>>> schannel =><br>>> firstcic => 33<br>>> echocancel=allways<br>
>> echocan_taps=32<br>>> echocan_train=350<br>>> enabled => yes<br>>><br>>> [link-l3]<br>>> linkset => MSC1<br>>> channels => 1-31<br>>> schannel =><br>>> firstcic => 65<br>
>> echocancel=no<br>>> echocan_taps=32<br>>> echocan_train=350<br>>> enabled => yes<br>>><br>>> [link-l4]<br>>> linkset => MSC1<br>>> channels => 1-31<br>>> schannel =><br>
>> firstcic => 97<br>>> echocancel=no<br>>> echocan_taps=32<br>>> echocan_train=350<br>>> enabled => yes<br>>><br>>> [link-l5]<br>>> linkset => MSC1<br>>> channels => 1-31<br>
>> schannel =><br>>> firstcic => 129<br>>> echocancel=no<br>>> echocan_taps=32<br>>> echocan_train=350<br>>> enabled => yes<br>>><br>>> [link-l6]<br>>> linkset => MSC1<br>
>> channels => 1-31<br>>> schannel =><br>>> firstcic => 161<br>>> echocancel=no<br>>> echocan_taps=32<br>>> echocan_train=350<br>>> enabled => yes<br>>><br>>> [link-l7]<br>
>> linkset => MSC1<br>>> channels => 1-31<br>>> schannel =><br>>> firstcic => 193<br>>> echocancel=no<br>>> echocan_taps=32<br>>> echocan_train=350<br>>> enabled => yes<br>
>><br>>> [link-l8]<br>>> linkset => MSC1<br>>> channels => 1-31<br>>> schannel =><br>>> firstcic => 225<br>>> echocancel=no<br>>> echocan_taps=32<br>>> echocan_train=350<br>
>> enabled => yes<br>>><br>>> [host-host1]<br>>> enabled => yes<br>>> default_linkset => MSC1<br>>> opc => 1000<br>>> dpc => MSC1:2000<br>>> links => l1:1,l2:2,l3:3,l4:4<br>
>> if-1 => 10.0.0.1<br>>><br>>> [host-host2]<br>>> enabled => yes<br>>> default_linkset => MSC1<br>>> opc => 1000<br>>> dpc => MSC1:2000<br>>> links => l5:1,l6:2,l7:3,l8:4<br>
>> if-1 => 10.0.0.2<br>>><br>>><br>>> Appreciate your comments,<br>>><br>>> Regards,<br>>><br>>> Antoine Megalla.<br>>><br>>><br>>><br>>><br>>> ----- Original Message ----<br>
>> From: Anders Baekgaard <<a href="mailto:ab@dicea.dk">ab@dicea.dk</a>><br>>> To: <a href="mailto:asterisk-ss7@lists.digium.com">asterisk-ss7@lists.digium.com</a><br>>> Sent: Thursday, April 2, 2009 12:03:57 PM<br>
>> Subject: Re: [asterisk-ss7] chan_ss7 signalling across multiple servers<br>>><br>>> Assuming link 'l1' has signaling on ts 16, and this is connected on server<br>>> 'host1', you will write<br>
>><br>>> [link-l1]<br>>> ...<br>>> schannel => 16, host1:12000<br>>> ...<br>>><br>>><br>>> You must specify this on both servers. It is easiest to have the same<br>>> configuration specification (ss7.conf) on both servers. chan_ss7 will<br>
>> forward signaling using TCP/IP to 'host1', port 12000, so you must ensure<br>>> mtp3d is running on that server.<br>>><br>>> Best regards,<br>><br>><br>> _______________________________________________<br>
> --Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--</a><br>><br>> asterisk-ss7 mailing list<br>> To UNSUBSCRIBE or update options visit:<br>
> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br>><br>><br>><br>><br>><br>> _______________________________________________<br>
> --Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--</a><br>><br>> asterisk-ss7 mailing list<br>> To UNSUBSCRIBE or update options visit:<br>
> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br>><br>><br><br>_______________________________________________<br>--Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--</a><br>
<br>asterisk-ss7 mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br></div>
</div></blockquote></div><br>