Hello Guys<br><br>I need modify <b>Screening</b>: parameter to value 3, right now i have <b>Screening</b>: 0 , but i donīt know where i can modify. I have Asterisk 1.6.0.9 Dahdi and Sangoma Card. The calls work really good but my provider can't pass the CLI or ANI to the other side because need the <b>Screening</b> parameter on value 3 and I send on 0, here my chan_dahdi.conf<br>
<br>[channels]<br>signalling=ss7<br>ss7type=itu<br>;ss7_called_nai=unknown<br>ss7_called_nai=dynamic<br>ss7_calling_nai=dynamic<br>context=from-pstn<br>;switchtype=euroisdn<br>usecallerid=yes<br>cidsignalling=dtmf<br>hidecallerid=no<br>
restrictcid=yes<br>callwaiting=yes<br>usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>canpark=yes<br>cancallforward=yes<br>callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>
relaxdtmf=yes<br>rxgain=0.0<br>txgain=0.0<br>group=1<br>callgroup=1<br>pickupgroup=1<br>immediate=no<br><br><br>linkset=1<br>networkindicator=national<br>;networkindicator=national_spare<br>pridialplan=international<br>pointcode = 9640<br>
adjpointcode = 9270<br>defaultdpc = 9264<br><br>