<html>
<head>
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
FONT-SIZE: 10pt;
FONT-FAMILY:Tahoma
}
</style>
</head>
<body class='hmmessage'>
Hi Nhadie,<BR>
<BR>
If the SS7 signalling is coming from Telco in the TDM timeslots, I will do one of two ways.<BR>
<BR>
1. Configure AS5400's E1 trunks for either R2 or PRI and connect third party R2 to SS7 or PRI to SS7 converter.<BR>
<BR>
2. Create a SIP trunk from AS5400 to the Asterisk machine with SS7. Calls from VoIP ( SIP/H323 ) network comes to AS5400 and AS5400 then routes it to Asterisk over this SIP trunk. Asterisk sends to PSTN. Calls coming from PSTN, Asterisk routes it to AS5400. <BR>
<BR>
<BR>
Be careful, if you need to support fax or modem over ip as I have not checked them for option 2.<BR>
<BR>
Rana<BR><BR><BR>
<BLOCKQUOTE>
<HR>
Date: Fri, 27 Jun 2008 07:41:19 -0700<BR>From: nhadie.ramos@yahoo.com<BR>To: asterisk-ss7@lists.digium.com<BR>Subject: Re: [asterisk-ss7] SS7 on AS5400<BR><BR>
<TABLE cellSpacing=0 cellPadding=0 border=0>
<TBODY>
<TR>
<TD vAlign=top>hi sir,<BR><BR>thanks for your reply. does that mean i need to buy E1 card? is it not possible to use it with AS5400 coz they already have it? or does chan_ss7 or libss7 need the E1 card? if E1 card is needed, and i bought 1, can i use that asterisk as a replacement for PGW2200 on handling the SS7 signal?<BR><BR>Regards,<BR>Nhadie<BR><BR>--- On <B>Fri, 6/27/08, Klaus Darilion <I><klaus.mailinglists@pernau.at></I></B> wrote:<BR>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px">From: Klaus Darilion <klaus.mailinglists@pernau.at><BR>Subject: Re: [asterisk-ss7] SS7 on AS5400<BR>To: nhadie.ramos@yahoo.com, asterisk-ss7@lists.digium.com<BR>Date: Friday, June 27, 2008, 2:36 PM<BR><BR><PRE>Nhadie Ramos schrieb:<BR>> Hi Guys,<BR>> <BR>> Sorry i'm new to SS7 i hope i won't annoy anyone with
my question:<BR>> <BR>> I'm building a Asterisk PBX for a client, they have an AS5400 with<BR>> 4xE1 SS7 link. based on reading i learned that it requires PGW2200,<BR>> which is quite pricy, is there a way i can use asterisk in place of<BR>> PGW2200 using chan_ss7 or libss7? or is there an opensource<BR>> alternative for PGW2200?<BR><BR>You can use Asterisk for SS7 - but then you do not need the AS5400 anymore.<BR><BR>regards<BR>klaus</PRE></BLOCKQUOTE></TD></TR></TBODY></TABLE><BR></BLOCKQUOTE><br /><hr />Introducing Live Search cashback . It's search that pays you back! <a href='http://search.live.com/cashback/?&pkw=form=MIJAAF/publ=HMTGL/crea=introsrchcashback' target='_new'>Try it Now</a></body>
</html>