<html>
<body>
Hello All,<br><br>
i m having problem on CIC mapping. i already tried as Barry
describe before I have attached the telco CIC mapping. My telco (
Ericsson switch) is giving me my SS7 signal on channel 1. here is my
zaptel.conf and zapata.conf file. i m using asterisk-trunk(122043),
libss7-trunk(176), zaptel-branches(4351), libpri-trunk(570). using one
Digium 407P and another sever with one Sangoma A108d on Quad Core Xeon
server.<br><br>
<b><u>TELCO CIC Mapping<br>
</u></b>E1 Timeslot CIC Value <br>
0
<x-tab> </x-tab>Synchronisation <br>
1
<x-tab> </x-tab><x-tab>
</x-tab>1 Signal <br>
2
<x-tab> </x-tab><x-tab>
</x-tab>2 <br>
3
<x-tab> </x-tab><x-tab>
</x-tab>3 <br>
4
<x-tab> </x-tab><x-tab>
</x-tab>4 <br>
5
<x-tab> </x-tab><x-tab>
</x-tab>5 <br>
6
<x-tab> </x-tab><x-tab>
</x-tab>6 <br>
7
<x-tab> </x-tab><x-tab>
</x-tab>7 <br>
8
<x-tab> </x-tab><x-tab>
</x-tab>8 <br>
9
<x-tab> </x-tab><x-tab>
</x-tab>9 <br>
10
<x-tab> </x-tab><x-tab>
</x-tab>10 <br>
11
<x-tab> </x-tab><x-tab>
</x-tab>11 <br>
12
<x-tab> </x-tab><x-tab>
</x-tab>12 <br>
13
<x-tab> </x-tab><x-tab>
</x-tab>13 <br>
14
<x-tab> </x-tab><x-tab>
</x-tab>14 <br>
15
<x-tab> </x-tab><x-tab>
</x-tab>15 <br>
16
<x-tab> </x-tab><x-tab>
</x-tab>16 Empty/Delta
<br>
17
<x-tab> </x-tab><x-tab>
</x-tab>17 <br>
18
<x-tab> </x-tab><x-tab>
</x-tab>18 <br>
19
<x-tab> </x-tab><x-tab>
</x-tab>19 <br>
20
<x-tab> </x-tab><x-tab>
</x-tab>20 <br>
21
<x-tab> </x-tab><x-tab>
</x-tab>21 <br>
22
<x-tab> </x-tab><x-tab>
</x-tab>22 <br>
23
<x-tab> </x-tab><x-tab>
</x-tab>23 <br>
24
<x-tab> </x-tab><x-tab>
</x-tab>24 <br>
25
<x-tab> </x-tab><x-tab>
</x-tab>25 <br>
26
<x-tab> </x-tab><x-tab>
</x-tab>26 <br>
27
<x-tab> </x-tab><x-tab>
</x-tab>27 <br>
28<x-tab> </x-tab><x-tab>
</x-tab>28 <br>
29
<x-tab> </x-tab><x-tab>
</x-tab>29 <br>
30
<x-tab> </x-tab><x-tab>
</x-tab>30 <br>
31
<x-tab> </x-tab><x-tab>
</x-tab>31 <br><br>
<br>
<b><u>zaptel.conf<br><br>
</u></b># Zaptel Channels Configurations (zaptel.conf)<br>
#<br>
loadzone=us<br>
defaultzone=us<br><br>
span=1,0,0,ccs,hdb3<br>
bchan=2-15,17-31<br>
dchan=1<br>
span=2,0,0,ccs,hdb3<br>
bchan=32-62<br><br>
<b><u>zapata.conf<br><br>
</u></b>signalling=ss7<br>
ss7type = itu<br>
linkset = 1<br>
pointcode = 4521<br>
adjpointcode = 9321<br>
defaultdpc = 9321<br>
sigchan = 1<br>
cicbeginswith=2<br>
channel = 2-15,17-31,32-46,48-62<br><br>
using that configuration i having CIC-16 on zap/17, calls r ok, but after
3 to 4 hour the asterisk server goes down. and i saw that kinda msg on
the asterisk log many time " <font color="#800000">chan_zap.c: REL
on channel (CIC 26) without owner!</font>" &
"<font color="#800000">chan_zap.c: Received RLC out and we haven't
sent REL. Ignoring.</font>" . if i use cicbeginswith=1 then
zap/17 have the CIC-17. But the problem is that when put this no call is
passing out from the system. <br><br>
Can u pls guide me if i had done anything wrong<br><br>
Best Regards<br>
shaon<br>
</body>
</html>