are you sure that u've two E1s each have a signalling link, if not then you should change the statement 'schannel=>16' in [link-ls] to as 'schannel=>' (i.e. don't specify '16' in it)
<br><br><div><span class="gmail_quote">On 3/12/07, <b class="gmail_sendername">Alexandre</b> <<a href="mailto:alexandrekeller@gmail.com">alexandrekeller@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div>Hi there !!!</div>
<div> </div>
<div>I've installed chan_ss7-0.9 on my Asterisk 1.2.16 and Zaptel-1.2.15.</div>
<div> </div>
<div>My zaptel.conf:</div>
<div>atualss7:/etc/asterisk# cat ../zaptel.conf
<br>span=1,1,0,ccs,hdb3<br>bchan=1-31<br> <br>span=2,0,0,ccs,hdb3<br>bchan=32-62<br> <br>loadzone
= us<br>defaultzone=us</div>
<div> </div>
<div>My ss7.conf</div>
<div>atualss7:/etc/asterisk# cat ss7.conf<br>[linkset-siuc]<br>enabled =>
yes<br>enable_st => no<br>use_connect => yes<br>hunting_policy =>
even_mru<br>context => ss7<br>; The value and action for t35. Value is in
msec, action is either st or timeout<br>; If you use overlapped dialling dial
plan, you might choose: t35 => 4000,st<br>t35 => 15000,timeout<br>; The
subservice field: national (8), international (0), auto or decimal/hex
value<br>; The auto means that the subservice is obtained from first received
SLTM<br>subservice => auto<br> <br> <br>[link-l1]<br>linkset =>
siuc<br>channels => 1-15,17-31<br>schannel => 16<br>firstcic =>
1<br>enabled => yes<br>; Echo cancellation<br>; echocancel can be one of: no,
31speech (enable only when transmission medium is 3.1Khz speech),
always<br>echocancel => allways<br>; echocan_train specifies training period,
between 10 to 100 msec<br>;echocan_train => 350<br>; echocan_taps specifies
number of taps, 32, 64, 128 or 256<br>echocan_taps =>
128<br> <br> <br>[link-l2]<br>linkset => siuc<br>channels =>
1-15,17-31<br>schannel => 16<br>firstcic => 33 <br>enabled =>
yes<br> <br>[host-atualss7]<br>enabled => yes<br>;opc => 0x8e0<br>opc
=> 0x7d8<br>;dpc => siuc:0x3fff<br>dpc => siuc:0x822<br>links =>
l1:1,l2:2<br></div>
<div>I?ve been trying to Dial as it follows:</div>
<div>Mar 7 13:30:10 DEBUG[4222]: pbx.c:1697 pbx_extension_helper: Launching
'Dial'<br> -- Executing Dial("SIP/1234-081dca60", "SS7/49115002") in new
stack<br> -- SS7 request (SS7/49115002) format = 0x8.<br> -- SS7 channel
SS7/49115002 allocated successfully.</div>
<div> </div>
<div>My SS7 tech guy says he is receveing: Astk: IAM REL-29, than my PSTN
answers with a RLC, but nothing happens, my softfoen keeps ring until gets a
timeout.</div>
<div> </div>
<div>My PSTN PBX, where SS7 Link is connected is a SPTel DSX-100.</div>
<div> </div>
<div>Any help would be great. Because we're needing to install another 10 links
exactly like that using chan_ss7.</div>
<div> </div>
<div>Thanks in advance,</div>
<br>_______________________________________________<br>--Bandwidth and Colocation provided by <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://Easynews.com" target="_blank">Easynews.com</a> --<br><br>
asterisk-ss7 mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-ss7
</a><br><br></blockquote></div><br><br clear="all"><br>-- <br> |__\__/__| /__/ \__\ |__| \__|<br><br><br>