<div>Dear sir,</div>
<div> I have configured as u written to me but iam getting this messages can u please help me sir .my orgination point code is 124 and destination point code is 31 and 32 in decimal in HEX 0-15-4 and 0-3-7 ,
0-4-0.If u dont mind can please guide me sir</div>
<div> </div>
<div>[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4<br>[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: Received error from mtp3 layer: -1
<br>[Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4<br>[Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: Received error from mtp3 layer: -1
<br>[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4<br>[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: Received error from mtp3 layer: -1
<br>[Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4<br>[Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: Received error from mtp3 layer: -1
<br>--- SS7 Up ---<br>[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: -- !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4<br>Resetting CICs 1 to 15<br>[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: -- Received error from mtp3 layer: -1
<br>Resetting CICs 17 to 62<br>--- SS7 Up ---<br> -- Resetting CICs 63 to 77<br> -- Resetting CICs 79 to 124<br><br>regards</div>
<div>surender<br> </div>
<div><span class="gmail_quote">On 29/09/06, <b class="gmail_sendername">Matthew Fredrickson</b> <<a href="mailto:creslin@digium.com">creslin@digium.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">There already is a zapata.conf sample config. You included it in your<br>reply. The zaptel.conf is setup just like you setup your PRI, with
<br>your bearers setup as bchans and your signalling channel(s) as dchan.<br><br>For an F-link, with one signalling channel zaptel.conf would look<br>something like this (for the channel layout)<br><br>bchan=1-15<br>dchan=16
<br>bchan=17-31<br><br>Your zapata.conf would looks something like this:<br>signalling=ss7<br>ss7type=itu<br>; which linkset all of these options apply to<br>linkset=1<br>; This is your point code<br>pointcode=1111<br>; This is the pointcode that your ISUP messages are sent to
<br>defaultdpc=2222<br>; This is the pointcode of the node adjacent to this link<br>adjpointcode=2222<br>; This is the channel number of your signalling channel (your dchan<br>option in zaptel.conf<br>sigchan=16<br>; Context calls will come into
<br>context=ss7<br>; This will map Zap/1-15 as CICs 1-15<br>cicbeginswith=1<br>channel=1-15<br>; This will map Zap/17-31 as CICs 17-31<br>cicbeginswith=17<br>channel=17-31<br><br>To do it with another linkset, just duplicate all of the above, but
<br>just change linkset=2 and set your options for that linkset.<br><br>Matthew Fredrickson<br><br><br>On Sep 29, 2006, at 1:49 PM, Mr.Surender Reddy wrote:<br><br>> Dear sir,<br>> If you dont mind can u please give me a sample conf file
<br>> like what Chanss7 people give in their list If u can add somthing like<br>> that .So that it will be easy for many to try this new development.<br>> <br>> regards<br>> surender<br>><br>> <br>> On 29/09/06, Matthew Fredrickson <
<a href="mailto:creslin@digium.com">creslin@digium.com</a>> wrote: It looks<br>> like you're trying to terminate 2 linksets on one machine.<br>>> Just set it up so that you have two linksets in zapata.conf.You
<br>>> can't<br>>> do comma separation for your sigchan and defaultdpc.You have to<br>>> declare those one at a time.Also, your zaptel.conf needs to have<br>>> your<br>>> signalling channel set to be dchan (or hardhdlc if you're using a card
<br>>> that supports it).<br>>><br>>> Matthew Fredrickson<br>>><br>>> On Sep 29, 2006, at 3:09 AM, Mr.Surender Reddy wrote:<br>>><br>>> > Dear Matthew,<br>>> > I Thankx for our Intrest to help me out in
<br>>> > this.Below are the Details which iam using for Chanss7 .But i want<br>>> to<br>>> > try Libss7 Please help me out.<br>>> ><br>>> > ss7.conf of Chanss7<br>>> ><br>
>> ><br>>> ><br>>> > [linkset-Ts1]<br>>> ><br>>> > enabled => yes<br>>> ><br>>> > enable_st => yes<br>>> ><br>>> > use_connect => yes
<br>>> ><br>>> > hunting_policy => seq_htl<br>>> ><br>>> > context => ss7<br>>> ><br>>> > subservice => 8<br>>> ><br>>> > [linkset-Ts2]<br>>> >
<br>>> > enabled => yes<br>>> ><br>>> > enable_st => yes<br>>> ><br>>> > use_connect =>yes<br>>> ><br>>> > hunting_policy => seq_htl<br>>> >
<br>>> > context => ss7<br>>> ><br>>> > subservice => 8<br>>> ><br>>> > [link-l1]<br>>> ><br>>> > linkset => Ts1<br>>> ><br>>> > channels => 1-15,17-31
<br>>> ><br>>> > schannel => 16<br>>> ><br>>> > firstcic => 1<br>>> ><br>>> > enabled => yes<br>>> ><br>>> > [link-l2]<br>>> ><br>>> > linkset => Ts1
<br>>> ><br>>> > channels => 1-31<br>>> ><br>>> > schannel =><br>>> ><br>>> > firstcic => 33<br>>> ><br>>> > enabled => YES<br>>> >
<br>>> > [link-l3]<br>>> ><br>>> > linkset => Ts2<br>>> ><br>>> > channels =>1-15,17-31<br>>> ><br>>> > schannel => 16<br>>> ><br>>> > firstcic => 1
<br>>> ><br>>> > enabled => yes<br>>> ><br>>> > [link-l4]<br>>> ><br>>> > linkset => Ts2<br>>> ><br>>> > channels => 1-31<br>>> ><br>
>> > schannel =><br>>> ><br>>> > firstcic => 33<br>>> ><br>>> > enabled => YES<br>>> ><br>>> > [host-localhost.localdomain]<br>>> ><br>>> > enabled => yes
<br>>> ><br>>> > default_linkset => Ts2<br>>> ><br>>> > opc => 124<br>>> ><br>>> > dpc => Ts1:31,Ts2:32<br>>> ><br>>> > links => l1:1,l2:2,l3:3,l4:4
<br>>> > This is the zaptel.conf<br>>> ><br>>> ><br>>> ><br>>> > span=1,0,0,ccs,hdb3<br>>> ><br>>> > bchan = 1-31<br>>> ><br>>> > span=2,0,0,ccs,hdb3
<br>>> ><br>>> > bchan=32-62<br>>> ><br>>> > span=3,0,0,ccs,hdb3<br>>> ><br>>> > bchan=63-93<br>>> ><br>>> > span=4,1,0,ccs,hdb3<br>>> ><br>
>> > bchan=94-124<br>>> ><br>>> ><br>>> > loadzone = us<br>>> ><br>>> > defaultzone = us<br>>> > I have compiled the Libss7 and tried to use that but iam unable to
<br>>> use<br>>> > that as Zapta.conf i couldnt configure fine i tired this way i dont<br>>> > think that is correct Can u please see this Zapta.conf which i<br>>> wanted<br>>> > to use for libss7
<br>>> ><br>>> ><br>>> > Signaling type SS7<br>>> > signalling = ss7<br>>> ><br>>> > ; Variant of SS7 signaling:<br>>> > ; Options are itu and ansi<br>>> > ss7type = itu
<br>>> ><br>>> > ; All settings apply to linkset 1<br>>> > linkset = 1<br>>> ><br>>> > ; Point code of the linkset<br>>> > pointcode = 124<br>>> ><br>>> > ; Point code of node adjacent to this signaling link (Possibly the
<br>>> STP<br>>> > between you and<br>>> > ; your destination)<br>>> > adjpointcode = 31,32<br>>> ><br>>> > ; Default point code that you would like to assign to outgoing
<br>>> > messages (in case of<br>>> > ; routing through STPs, or using A links)<br>>> > defaultdpc = 31,32<br>>> ><br>>> > ; Begin CIC (Circuit indication codes) count with this number
<br>>> > cicbeginswith = 1<br>>> ><br>>> > ; What the MTP3 network indicator bits should be set to. Choices<br>>> are<br>>> > ; national, national_spare, international, international_spare
<br>>> > networkindicator=national<br>>> ><br>>> > ; First signaling channel<br>>> > sigchan = 16<br>>> ><br>>> > ; Channels to associate with CICs on this linkset<br>
>> > channel = 25-47<br>>> > regards<br>>> > surender<br>>> ><br>>> ><br>>> > On 28/09/06, Matthew Fredrickson < <a href="mailto:creslin@digium.com">creslin@digium.com
</a>> wrote: What<br>>> is<br>>> > the layout of your spans (which channel is the signalling<br>>> >> channel on) and what is your layout of your CICs ( i.e. what<br>>> channels<br>>> >> map to which CICs).After you find that out post your
zaptel.conf<br>>> and<br>>> >> zapata.conf and we'll see if we can sort it out.<br>>> >><br>>> >> Matthew Fredrickson<br>>> >><br>>> >> On Sep 28, 2006, at 1:49 AM,
Mr.Surender Reddy wrote:<br>>> >><br>>> >> > HI Matthew,<br>>> >> > Iam using Chanss7 i would like to test Libss7 iam<br>>> >> > unable to configure my SS7 channels with this version I have two
<br>>> ss7<br>>> >> > Links i would like to test both on this machine.How can i do this<br>>> >> can<br>>> >> > u please guide me if u dont mind.<br>>> >> ><br>
>> >> > regards<br>>> >> > surender<br>>> >> ><br>>> >> ><br>>> >> > On 27/09/06, Matthew Fredrickson < <a href="mailto:creslin@digium.com">creslin@digium.com
</a>> wrote:<br>>> >> >> On Sep 26, 2006, at 9:44 PM, Rob Hillis wrote:<br>>> >> >><br>>> >> >> >> Also, you may want to get asterisk trunk as well, since<br>
>> >> >> >> that I merged in all the libss7 changes from the asterisk-ss7<br>>> >> >> branch<br>>> >> >> >> into asterisk-trunk. (svn co<br>>> >> >>
<a href="http://svn.digium.com/svn/asterisk/trunk">http://svn.digium.com/svn/asterisk/trunk</a><br>>> >> >>>> asterisk-trunk)<br>>> >> >> ><br>>> >> >> ><br>
>> >> >> > So does this mean that the asterisk-ss7 branch is no longer<br>>> under<br>>> >> >> > development and all future changes are going to be made to the<br>>> >> >> Asterisk
<br>>> >> >> > trunk?Should I be looking at moving from the asterisk-ss7<br>>> branch<br>>> >> >> to<br>>> >> >> > the<br>>> >>>> > main asterisk trunk?
<br>>> >> >><br>>> >> >> For the time being, yes, that would probably be a good idea.I<br>>> think<br>>> >> >> I<br>>> >> >> may re-branch the asterisk-ss7 branch whenever the
1.4 release<br>>> >> comes<br>>> >> >> out though and backport the changes in trunk to the 1.4 based<br>>> ss7<br>>> >> >> branch.<br>>> >><br>>> >> _______________________________________________
<br>>> >> --Bandwidth and Colocation provided by <a href="http://Easynews.com">Easynews.com</a> --<br>>> >><br>>> >> asterisk-ss7 mailing list<br>>> >> To UNSUBSCRIBE or update options visit:
<br>>> >> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br>>> > _______________________________________________<br>>> > --Bandwidth and Colocation provided by
<a href="http://Easynews.com">Easynews.com</a> --<br>>> ><br>>> > asterisk-ss7 mailing list<br>>> > To UNSUBSCRIBE or update options visit:<br>>> ><a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7">
http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br>>><br>>> _______________________________________________<br>>> --Bandwidth and Colocation provided by <a href="http://Easynews.com">Easynews.com
</a> --<br>>><br>>> asterisk-ss7 mailing list<br>>> To UNSUBSCRIBE or update options visit:<br>>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7">http://lists.digium.com/mailman/listinfo/asterisk-ss7
</a><br>> _______________________________________________<br>> --Bandwidth and Colocation provided by <a href="http://Easynews.com">Easynews.com</a> --<br>><br>> asterisk-ss7 mailing list<br>> To UNSUBSCRIBE or update options visit:
<br>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br><br>_______________________________________________<br>--Bandwidth and Colocation provided by
<a href="http://Easynews.com">Easynews.com</a> --<br><br>asterisk-ss7 mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7">http://lists.digium.com/mailman/listinfo/asterisk-ss7
</a><br></blockquote></div><br>