[asterisk-ss7] Using dynamic DAHDI loop back with Libss7

[Mehdi Shirazi]

>> what problem are u
 >>getting ?
Thank you for  replies.
At first there was no  CLI?ahdi and ss7 commands, after I add missing definition
according to Kaloyan recomendation , now I have Dahdi and ss7 CLI commands
but output of all of them is empty.

Regards


 
 On
 Thu, Mar 17, 2016 at 1:15 PM, Mehdi Shirazi <mahdi_shirazi at yahoo.com>
 wrote:
 > Hi
 > This is
 my system.conf :
 >
 dynamic=loc,1:0,31,0
 >
 bchan=1-15,17-31
 > dchan=16
 > echocanceller=mg2,1-15,17-31
 >
 >
 dynamic=loc,1:1,31,0
 >
 bchan=32-46,48-62
 > dchan=47
 > echocanceller=mg2,32-46,48-62
 >
 > and this is my
 chan_dahdi.conf:
 > [channels]
 > signalling = ss7
 >
 ss7type = itu
 >
 >
 group = 1
 > linkset = 1
 > context = one
 >
 slc=0
 > pointcode = 1111
 > adjpointcode = 2222
 >
 defaultdpc = 2222
 > cicbeginswith = 1
 > channel=1-15
 > sigchan
 = 16
 >
 > group=2
 > linkset = 2
 > context =
 two
 > slc=0    ; same slc=0 because of
 loop back
 > pointcode = 2222
 > adjpointcode=1111
 >
 defaultdpc=1111
 > cicbeginswitch=1
 > channel=32-46
 > sigchan
 = 47
 >
 > please tell
 me what is wrong in this configuration?
 >
 > Regards
 >
 > --
 >
 _____________________________________________________________________
 > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
 >
 > asterisk-ss7 mailing
 list
 > To UNSUBSCRIBE or update options
 visit:
 >    http://lists.digium.com/mailman/listinfo/asterisk-ss7