[asterisk-ss7] Using dynamic DAHDI loop back with Libss7

[Kaloyan Kovachev]

Hi,
you are missing some definitions (networkindicator, ss7_called_nai, 
ss7_calling_nai, ss7_*prefix) for the linksets and also to use mtp3/isup 
timers (highly recommended) they should be explicitly defined

On 2016-03-17 10:15, Mehdi Shirazi wrote:
> Hi
> This is my system.conf :
> dynamic=loc,1:0,31,0
> bchan=1-15,17-31
> dchan=16
> echocanceller=mg2,1-15,17-31
> 
> dynamic=loc,1:1,31,0
> bchan=32-46,48-62
> dchan=47
> echocanceller=mg2,32-46,48-62
> 
> and this is my chan_dahdi.conf:
> [channels]
> signalling = ss7
> ss7type = itu
> 
> group = 1
> linkset = 1
> context = one
> slc=0
> pointcode = 1111
> adjpointcode = 2222
> defaultdpc = 2222
> cicbeginswith = 1
> channel=1-15
> sigchan = 16
> 
> group=2
> linkset = 2
> context = two
> slc=0    ; same slc=0 because of loop back
> pointcode = 2222
> adjpointcode=1111
> defaultdpc=1111
> cicbeginswitch=1
> channel=32-46
> sigchan = 47
> 
> please tell me what is wrong in this configuration?
> 
> Regards