[asterisk-ss7] Two servers with same point code - chan_ss7

[Kashif Ali]

use chan_ss7 with mtp3d service and ask telco guys to establish ss7 link on
2 signlaning channels with the same point code for redundancy,.

run mtp3d demon on both servers.



[link-l1]
linkset => g0
channels => 2-31
schannel => 1 at ss7link1:11999
firstcic => 289
enabled => yes
sltm => no
sls => 0

[link-l5]
linkset => g2
channels => 2-31
schannel => 1 at ss7link2:11999
firstcic => 289
enabled => yes
sltm => no
sls => 0


[host-ss7link1]
default_linkset => g0
enabled => yes
opc => 3500
dpc => g0:9500
links => l1:1,l2:2,l3:3,l4:4
if-1 => 10.1.1.1

[host-ss7link2]
default_linkset => g1
enabled => yes
opc => 3500
dpc => g0:9500
links => l5:1,l6:2,l7:3
if-1 => 10.1.1.2



On Fri, Jul 15, 2016 at 9:16 AM, bipin singh <bipinraghuvanshi at gmail.com>
wrote:

> You can use  same point code from telco side but your end need different
> point code  in libss7.
>
> On Fri, Jul 15, 2016 at 5:44 AM, Rafael dos Santos Saraiva <
> rafaelsnsa at gmail.com> wrote:
>
>> My scenario: https://s32.postimg.org/jybtpsdr9/same_opc.png
>>
>>
>> 2016-07-14 5:37 GMT-03:00 Mesbahuddin Malik <mesbah.malik at gmail.com>:
>>
>>> Hello,
>>> Chan_ss7 can  according to your requirement. Please read the examples
>>> provided by chan_ss7 with multple point codes.
>>>
>>> Regards
>>> Mesbah
>>>
>>> On Thu, Jul 14, 2016 at 8:23 AM, Rafael dos Santos Saraiva <
>>> rafaelsnsa at gmail.com> wrote:
>>>
>>>> Hi there
>>>>
>>>> My scenario is the follow:
>>>>
>>>> My pointcode is 3500, the point codes of another Telco is 9500 and
>>>> 9501. I need interconnect each pointcode of the telco on each servers. The
>>>> problem is i has only one point code.
>>>>
>>>>         /  Telco 1 - Interconnect point 1 - Pointcode 9500 sig chan 16
>>>> ------------------  Server 1 - Chan_SS7 - Pointcode 3500
>>>> STP-|
>>>>         \  Telco 1 - Interconnect point 2 - Pointcode 9501
>>>> ------------------------------  Server 2 - Chan_SS7 - Pointcode 3500
>>>>
>>>> There is a way to using the same pointcode in two servers? I tried
>>>> various configurations in ss7.conf, but any works.
>>>>
>>>> Thanks in advance.
>>>>
>>>> --
>>>>
>>>> [image: Sua Foto] <rafaelsnsa at gmail.com> Rafael S. Saraiva
>>>> Porto Alegre - RS | Mobile:  (51) 8174-7956
>>>> <http://br.linkedin.com/pub/rafael-saraiva/52/aab/230>
>>>> <https://plus.google.com/u/0/+RafaelSaraivaRS>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-ss7 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>
>>
>>
>>
>> --
>>
>> [image: Sua Foto] <rafaelsnsa at gmail.com> Rafael S. Saraiva
>> Porto Alegre - RS | Mobile:  (51) 8174-7956
>> <http://br.linkedin.com/pub/rafael-saraiva/52/aab/230>
>> <https://plus.google.com/u/0/+RafaelSaraivaRS>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20160715/af7bf79f/attachment-0001.html>