[asterisk-ss7] GRS on unconfigured range
Gustavo Marsico
gustavomarsico at gmail.com
Mon Jan 11 15:00:06 CST 2016
If you’re bringing up a loopback between 2 ports on the same system, the CIC’s must have the same numbering on both linksets.
> On Jan 11, 2016, at 5:53 PM, Jean Cérien <cerien.jean at gmail.com> wrote:
>
>
> Hello
>
> I am building a new production server, and I am in the test phase.
> Server has a te235 digium card, and
> dahdi-linux-complete-2.11.0+2.11.0
> libss7-2.0.0
> asterisk-13.6.0
> libpri-1.4.15
>
> I am currently configuring in loopback the two ports, with a cross cable - I've been successfull in isdn, now testing ss7 (final objective).
>
> I'm in E1/ansi, linkset 1 has signalliing channel 1, cic 2-31, and linkset 2 has signalling channel 32, cic 33-62
>
> I think I'm nearly there, but when I start asterisk, I get a serie of messages "sig_ss7.c:1600 ss7_linkset: GRS on unconfigured range CIC <xx> - <yy> PC [1 or 2]" - ss7 show channels shows idle=no for all (see below).
>
> Yet, the two spans are declared - I understand this setup is possible, what could be wrong ?
>
> Any help would be appreciated,
>
> Rgds
> J.
>
> system.conf
> span=1,1,0,ccs,hdb3,crc4
> # termtype: te
> bchan=2-31
> dchan=1
> echocanceller=mg2,2-31
>
>
> # Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2"
> span=2,0,0,ccs,hdb3,crc4
> # termtype: nt
> bchan=33-62
> dchan=32
> echocanceller=mg2,33-62
>
>
> chan_dahdi.conf
> [trunkgroups]
>
> [channels]
>
> usecallerid=yes
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
>
>
> networkindicator=national
> signalling=ss7
> ss7type=ansi
> context=incoming-dahdi
>
> group=1
> linkset=1
> pointcode=1
> adjpointcode=2
> defaultdpc=2
> cicbeginswith=2
> channel=2-31
> sigchan=1
>
>
>
> group=2
> linkset=2
> pointcode=2
> adjpointcode=1
> defaultdpc=1
> cicbeginswith=33
> channel=33-62
> sigchan=32
>
>
> ss7 show channels
> link Chan Lcl Rem Call SS7 Channel
> set Chan Idle Blk Blk Level Call Name
> 1 2 No No No Idle Yes
> 1 3 No No No Idle No
> 1 4 No No No Idle No
> 1 5 No No No Idle No
> 1 6 No No No Idle No
> 1 7 No No No Idle No
> 1 8 No No No Idle No
> 1 9 No No No Idle No
> 1 10 No No No Idle No
> 1 11 No No No Idle No
> 1 12 No No No Idle No
> 1 13 No No No Idle No
> 1 14 No No No Idle No
> 1 15 No No No Idle No
> 1 16 No No No Idle No
> 1 17 No No No Idle No
> 1 18 No No No Idle No
> 1 19 No No No Idle No
> 1 20 No No No Idle No
> 1 21 No No No Idle No
> 1 22 No No No Idle No
> 1 23 No No No Idle No
> 1 24 No No No Idle No
> 1 25 No No No Idle No
> 1 26 No No No Idle No
> 1 27 No No No Idle Yes
> 1 28 No No No Idle No
> 1 29 No No No Idle No
> 1 30 No No No Idle No
> 1 31 No No No Idle No
> 2 33 No No No Idle Yes
> 2 34 No No No Idle No
> 2 35 No No No Idle No
> 2 36 No No No Idle No
> 2 37 No No No Idle No
> 2 38 No No No Idle No
> 2 39 No No No Idle No
> 2 40 No No No Idle No
> 2 41 No No No Idle No
> 2 42 No No No Idle No
> 2 43 No No No Idle No
> 2 44 No No No Idle No
> 2 45 No No No Idle No
> 2 46 No No No Idle No
> 2 47 No No No Idle No
> 2 48 No No No Idle No
> 2 49 No No No Idle No
> 2 50 No No No Idle No
> 2 51 No No No Idle No
> 2 52 No No No Idle No
> 2 53 No No No Idle No
> 2 54 No No No Idle No
> 2 55 No No No Idle No
> 2 56 No No No Idle No
> 2 57 No No No Idle No
> 2 58 No No No Idle Yes
> 2 59 No No No Idle No
> 2 60 No No No Idle No
> 2 61 No No No Idle No
> 2 62 No No No Idle No
> *CLI> ss7 show channels
> link Chan Lcl Rem Call SS7 Channel
> set Chan Idle Blk Blk Level Call Name
> 1 2 No No No Idle Yes
> 1 3 No No No Idle No
> 1 4 No No No Idle No
> 1 5 No No No Idle No
> 1 6 No No No Idle No
> 1 7 No No No Idle No
> 1 8 No No No Idle No
> 1 9 No No No Idle No
> 1 10 No No No Idle No
> 1 11 No No No Idle No
> 1 12 No No No Idle No
> 1 13 No No No Idle No
> 1 14 No No No Idle No
> 1 15 No No No Idle No
> 1 16 No No No Idle No
> 1 17 No No No Idle No
> 1 18 No No No Idle No
> 1 19 No No No Idle No
> 1 20 No No No Idle No
> 1 21 No No No Idle No
> 1 22 No No No Idle No
> 1 23 No No No Idle No
> 1 24 No No No Idle No
> 1 25 No No No Idle No
> 1 26 No No No Idle No
> 1 27 No No No Idle Yes
> 1 28 No No No Idle No
> 1 29 No No No Idle No
> 1 30 No No No Idle No
> 1 31 No No No Idle No
> 2 33 No No No Idle Yes
> 2 34 No No No Idle No
> 2 35 No No No Idle No
> 2 36 No No No Idle No
> 2 37 No No No Idle No
> 2 38 No No No Idle No
> 2 39 No No No Idle No
> 2 40 No No No Idle No
> 2 41 No No No Idle No
> 2 42 No No No Idle No
> 2 43 No No No Idle No
> 2 44 No No No Idle No
> 2 45 No No No Idle No
> 2 46 No No No Idle No
> 2 47 No No No Idle No
> 2 48 No No No Idle No
> 2 49 No No No Idle No
> 2 50 No No No Idle No
> 2 51 No No No Idle No
> 2 52 No No No Idle No
> 2 53 No No No Idle No
> 2 54 No No No Idle No
> 2 55 No No No Idle No
> 2 56 No No No Idle No
> 2 57 No No No Idle No
> 2 58 No No No Idle Yes
> 2 59 No No No Idle No
> 2 60 No No No Idle No
> 2 61 No No No Idle No
> 2 62 No No No Idle No
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4127 bytes
Desc: not available
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20160111/bbd05075/attachment-0001.bin>
More information about the asterisk-ss7
mailing list