[asterisk-ss7] asterisk cluster with chan_ss7 and mtp3d

[Kashif Ali]

downgrade your chan_ss7


On Sat, Dec 24, 2016 at 3:40 PM, Daniel Fernandes <dsf at t2change.com> wrote:

> Hi Kashif,
>
> I already corrected the port on p11 to 50002, and already have mtp3d
> running on both systems, but have the same messages.
>
> Thanks
> Daniel Fernandes
>
>
> Em 23/12/2016 23:54, Kashif Ali <kashif at kashifbukhari.com> escreveu:
>
> also run mtp3d service on both servers,
>
>
> On Sat, Dec 24, 2016 at 4:48 AM, Kashif Ali <kashif at kashifbukhari.com>
> wrote:
>
> check p11 using same port as p8
>
>  [link-p11]
> linkset => C
> channels => 2-31
> schannel => 1 at box1:50001
> firstcic => 97
> sls => 1
> stp => 3080
> echocancel => no
> enabled => yes
>
>
>
> On Fri, Dec 23, 2016 at 4:36 PM, Daniel Fernandes <dsf at t2change.com>
> wrote:
>
>   Hi Kashif,
>
>   first of all thanks for your reply.
>
>   please ss7.conf below
>
>   [linkset-A]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => seq_htl
> subservice => 0xc
> context => CALLS
> language => pt
> variant => ITU
> combined => mated-pair
>
> [linkset-B]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => seq_htl
> subservice => 0xc
> context => CALLS
> language => pt
> variant => ITU
> combined => mated-pair
>
> [linkset-C]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => seq_htl
> subservice => 0xc
> context => CALLS
> language => pt
> variant => ITU
> combined => mated-pair
>
> [link-p1]
> linkset => B
> channels => 1-31
> schannel =>
> firstcic => 1
> enabled => yes
>
> [link-p2]
> linkset => B
> channels => 1-31
> schannel =>
> firstcic => 65
> enabled => yes
>
> [link-p3]
> linkset => B
> channels => 1-31
> schannel =>
> firstcic => 129
> enabled => yes
>
> [link-p4]
> linkset => B
> channels => 1-31
> schannel =>
> firstcic => 33
> enabled => yes
>
> [link-p5]
> linkset => B
> channels => 1-31
> schannel =>
> firstcic => 97
> enabled => yes
>
> [link-p6]
> linkset => B
> channels => 1-31
> schannel =>
> firstcic => 161
> enabled => yes
>
> [link-p7]
> linkset => C
> channels => 1-31
> schannel =>
> firstcic => 1
> enabled => yes
>
> [link-p8]
> linkset => C
> channels => 2-31
> schannel => 1 at box1:50001
> firstcic => 65
> stp => 3050
> sls => 1
> echocancel => no
> enabled => yes
>
> [link-p9]
> linkset => C
> channels => 1-31
> schannel =>
> firstcic => 129
> enabled => yes
>
> [link-p10]
> linkset => C
> channels => 1-31
> schannel =>
> firstcic => 33
> enabled => yes
>
> [link-p11]
> linkset => C
> channels => 2-31
> schannel => 1 at box1:50001
> firstcic => 97
> sls => 1
> stp => 3080
> echocancel => no
> enabled => yes
>
> [link-p12]
> linkset => C
> channels => 1-31
> schannel =>
> firstcic => 161
> enabled => yes
>
> [link-p13]
> linkset => A
> channels => 2-31
> schannel => 1 at box2:50003
> firstcic => 1
> sls => 0
> stp => 3050
> echocancel => no
> enabled => yes
>
> [link-p14]
> linkset => A
> channels => 1-31
> schannel =>
> firstcic => 65
> enabled => yes
>
> [link-p15]
> linkset => A
> channels => 2-31
> schannel => 1 at box2:50004
> firstcic => 33
> sls => 0
> stp => 3080
> echocancel => no
> enabled => yes
>
> [link-p16]
> linkset => A
> channels => 1-31
> schannel =>
> firstcic => 97
> enabled => yes
>
> [host-box1]
> enabled => yes
> opc => 10001
> dpc => A:950,B:970,C:1000
> links => p5:5,p6:6,p7:7,p8:8,p9:9,p10:10,p11:11,p12:12
> if-1 => 192.168.1.199
>
> [host-box2]
> enabled => yes
> opc => 10001
> dpc => A:950,B:970,C:1000
> links => p1:1,p2:2,p3:3,p4:4,p13:9,p14:6,p15:7,p16:8
> if-1 => 192.168.1.200
>
> Regards,
>     Daniel Fernandes
>
>
>
>
> On 12/22/2016 07:31 PM, Kashif Ali wrote:
>
> send full ss7.conf
>
> On Wed, Dec 21, 2016 at 9:37 PM, Daniel Fernandes <dsf at t2change.com>
> wrote:
>
> Hi,
>
>
> I’m configuring 2 asterisk boxes with 16 E1 using chan_ss7 and mtp3d for
> clustering.
>
> My Versions:
>
>  * Asterisk 11.18.0
>  * Dahdi 2.10.2
>  * Chan_ss7 2.4.4 from svn
>
> my ss7.conf file is the same in both boxes, and my schannel is configured
> as:
> schannel => 1 at box1:50001
>
> Checking mtp3d and asterisk logs, i found some strange messages:
>
> on asterisk logs:
>      WARNING[11594] cluster.c: No way to send packet to cluster,
> link='p1', reqtype=2
>
> on mtp3d logs:
>     mtp3io.c:162 mtp3_reply Send packet to 0.0.0.0:16640
>
> since i'm not defined port 16640 anywhere, why mtp3d tries to reply to any
> host on that port?
>
> can anyone give me some help to understand what am i doing wrong?
>
> thanks in advance,
> Daniel
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
>
>
> --
> Daniel Fernandes
> System Administrator/Developer
>
> Time 2 Change
> Rua Consiglieri Pedroso nº123
> Parque da Iberfar - Edifício H
> Queluz de Baixo
> 2730-056 Barcarena
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20161227/2e9e1e55/attachment.html>