[asterisk-ss7] chan_ss7 or libss7 work with asterisk v13?

[Goke Aruna]

Thanks Alex,
I made the changes as recommende.
I changed the hardhdlc=16 to mtp2=16
disable the CRC4 and TDMV_DCHAN

however, I got the linkset status as contained below with mtp3 error.

your kind help will be appreciated.

Connected to Asterisk 13.8.1 currently running on sipgw1 (pid = 2022)

sipgw1*CLI> ss7 show linkset 1
SS7 flags: 0x0
SS7 linkset 1 status: Down
SS7 calling nai: 3
SS7 called nai: 3
SS7 nationalprefix:
SS7 internationalprefix:
SS7 unknownprefix:
SS7 networkroutedprefix:
SS7 subscriberprefix:
Switch type: ITU
Our point code: 58
SLS shift: 0
numlinks: 1
numsps: 1
  ---------------------------------
  Adjacent SP PC: 1312 STATE: DOWN
  TRA:  SENT    T19: not running T21: not running
  Routes:
    DPC       State        T6       T10
  Link ADJ_PC:SLC: 1312:0 NetMngSLS: 0
    State:      INSERVICE,  UP
    STD Test:  passed
    Got, sent :
    Inhibit:
    Changeover: NO
    Tx buffer:  0
    Tx queue:   0
    Retrans pos 0
    CO buffer:  0
    CB buffer:  0
    Last FSN:   64
    MTP3timers:
[Apr 19 19:57:51] ERROR[2546]: chan_dahdi.c:13709 dahdi_ss7_error: [1] Got
ISUP message on link while MTP3 state is not UP!
medasipgw1*CLI>
[Apr 19 19:57:53] ERROR[2546]: chan_dahdi.c:13709 dahdi_ss7_error: [1] Got
ISUP message on link while MTP3 state is not UP!
[Apr 19 19:57:53] ERROR[2546]: chan_dahdi.c:13709 dahdi_ss7_error: [1] Got
ISUP message on link while MTP3 state is not UP!
[Apr 19 19:57:53] ERROR[2546]: chan_dahdi.c:13709 dahdi_ss7_error: [1] Got
ISUP message on link while MTP3 state is not UP!
[Apr 19 19:57:53] ERROR[2546]: chan_dahdi.c:13709 dahdi_ss7_error: [1] Got
ISUP message on link while MTP3 state is not UP!
[Apr 19 19:57:53] ERROR[2546]: chan_dahdi.c:13709 dahdi_ss7_error: [1] Got
ISUP message on link while MTP3 state is not UP!
[Apr 19 19:57:53] ERROR[2546]: chan_dahdi.c:13709 dahdi_ss7_error: [1] Got
ISUP message on link while MTP3 state is not UP!
[Apr 19 19:57:53] ERROR[2546]: chan_dahdi.c:13709 dahdi_ss7_error: [1] Got
ISUP message on link while MTP3 state is not UP!





On Tue, Apr 19, 2016 at 7:20 PM, Alex Dranchuk <alex.dranchuk at gmail.com>
wrote:

> Guess I got your problem
> try to play with d channel
> at /etc/dahdi/system.conf as well as corresponding
> settings at wanpipe.
>
> hardhdlc never worked for me, even if sangoma recommends it.
>
> libss7 use mtp2=16    !!!
>
> chan_ss7 not like at all any settings and all channels marked as
> bchan=1-31  !!! (yes chan_ss7 handle all signalling by himself with
> own stack)
>
> and you MUST turn off at wanpipe sinnalling channel like
> TDMV_DCHAN=0
>
> Wish You luck!
> P.S: don't forget play with CRC4 along!
>
>
> >> span=1,1,0,ccs,hdb3,crc4
> >> bchan=1-15,17-31
> >> echocanceller=mg2,1-15,17-31
> >> hardhdlc=16
>
>
> ---
> Это сообщение проверено на вирусы антивирусом Avast.
> https://www.avast.com/antivirus
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20160419/22f153fb/attachment.html>