[asterisk-ss7] For help

Wed Oct 23 23:38:21 CDT 2013

On Thu, Oct 24, 2013 at 10:08 AM, bipin singh <bipinraghuvanshi at gmail.com>wrote:

>
>
>
> On Wed, Mar 7, 2012 at 10:29 AM, bipin singh <bipinraghuvanshi at gmail.com>wrote:
>
>> Hi ,
>>                Check it 2 ss7 links configuration but it is on libss7. In
>> this configuration both ss7 link working on single ACP and DCP.
>>                   It is working on Ericsson switch .
>>
>> [trunkgroups]
>>
>> [channels]
>> group=1
>> context=outbound
>> usecallerid=yes
>> hidecallerid=no
>> callwaiting=yes
>> usecallingpres=no
>> callwaitingcallerid=yes
>> threewaycalling=yes
>> transfer=yes
>> canpark=yes
>> cancallforward=yes
>> faxdetect=both
>>
>> callprogress=no
>> progzone=in
>> pulsedial=yes
>> ;busydetect=yes
>> callreturn=yes
>> echocancel=yes
>> echocancelwhenbridged=yes
>> rxgain=0.5
>> txgain=0.5
>> callgroup=1
>> pickupgroup=1
>>
>> signalling=ss7
>> ss7type=itu
>> linkset=1
>> networkindicator=national
>> pointcode=5235
>> defaultdpc=5839
>> group=1
>> adjpointcode=5839
>> mtp2=16
>> sigchan=16
>> cicbeginswith=1
>> channel=1-15
>> cicbeginswith=17
>> channel=17-31
>>
>> group=2
>> cicbeginswith=32
>> channel=32-46,48-62
>>
>>
>> On Mon, Mar 5, 2012 at 7:43 AM, Bai Bin <baimushan at gmail.com> wrote:
>>
>>>
>>> hi
>>>       I edit the ss7.conf as your recommend to delete the information
>>> about the  CIC ,but the asterisk can't start.
>>>
>>>       Here is my original ss7.conf(i add the CIC information). servers
>>> sharing one point code have 12port E1 card.
>>>
>>>       Can you give me an example? Waiting for your reply.
>>>
>>>
>>> [linkset-g1]
>>> enabled => yes
>>> enable_st => no
>>> use_connect => no
>>> hunting_policy => even_mru
>>> subservice => auto
>>> variant => CHINA
>>> context => from_pstn
>>> language => cn
>>> t35 => 15000,timeout
>>>
>>> [link-l1]
>>> linkset => g1
>>> echocancel => no
>>> channels => 1-15,17-31
>>> schannel => 16
>>> firstcic => 1
>>> enabled => yes
>>>
>>> [link-l2]
>>> linkset => g1
>>> echocancel => no
>>> channels => 1-31
>>> schannel =>
>>> firstcic => 33
>>> enabled => yes
>>>
>>> [link-l3]
>>> linkset => g1
>>> channels => 1-31
>>> schannel =>
>>> firstcic => 65
>>> enabled => yes
>>>
>>> [link-l4]
>>> linkset => g1
>>> echocancel => no
>>> channels => 1-31
>>> schannel =>
>>> firstcic => 97
>>> enabled => yes
>>>
>>>   .
>>>   .
>>>   .
>>>
>>> [link-l24]
>>> linkset => g1
>>> echocancel => no
>>> channels => 1-31
>>> schannel =>
>>> firstcic => 737
>>> enabled => yes
>>>
>>> [host-host1]
>>> enabled => yes
>>> default_linkset => g1
>>> opc => 0x020202
>>> dpc => g1:0x010101
>>> links =>
>>> l1:1,l2:2,l3:3,l4:4,l5:5,l6:6,l7:7,l8:8,l9:9,l10:10,l11:11,l12:12
>>> if-1 => 192.168.2.92
>>>
>>> [host-host2]
>>> enabled => yes
>>> default_linkset => g1
>>> opc => 0x020202
>>> dpc => g1:0x010101
>>> links =>
>>> l13:1,l14:2,l15:3,l16:4,l17:5,l18:6,l19:7,l20:8,l21:9,l22:10,l23:11,l24:12
>>> if-1 => 192.168.2.93
>>>
>>>
>>> Message: 2
>>> Date: Sat, 3 Mar 2012 11:01:18 +0530
>>> From: bipin singh <bipinraghuvanshi at gmail.com>
>>> Subject: Re: [asterisk-ss7] For help
>>> To: asterisk-ss7 at lists.digium.com
>>> Message-ID:
>>>        <CAGbA=
>>> 3-gb3iSE_z8zVmq2w8YQwFiTmek5CqqMEUj+tzbx3iv9w at mail.gmail.com>
>>> Content-Type: text/plain; charset="iso-8859-1"
>>>
>>> Hi,
>>>          Yes, Try without CIC setting and also block from provider end.
>>>
>>> On Thu, Mar 1, 2012 at 12:52 PM, Bai Bin <baimushan at gmail.com> wrote:
>>>
>>> > hello,everyone:
>>> >
>>> >       i'm a freshman on voip. there is a problem about  asterisk .
>>> >
>>> >       there is a 4E1 with signalling(ss7) and three servers(a part has
>>> one
>>> > server and the other has two server).  Two servers on the same part
>>> share
>>> > the same point code as a cluster to get load sharing Then the two
>>> different
>>> > parts can interconnect with each other.
>>> >
>>> >       I try to edit ss7.conf .but it doesn't work . Only one of the
>>> > servers on the same part works,the  other do nothing.
>>> >
>>> >      Can sharing one point code with two or more servers?
>>> >
>>> >     Waiting for your help.
>>> >     ps:  software version  chan_ss7 2.0.0
>>> >                                     asterisk 1.4.26
>>> > bai
>>> > 3.1.2012
>>> >
>>> > --
>>> > _____________________________________________________________________
>>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> >
>>> > asterisk-ss7 mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> >
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>
>>
>>
>>
>> --
>> BIPIN RAGHUVANSHI
>> OPERATION HEAD
>> ASTERISK (DEVELOPMENT AND RESEARCH)
>> WWW.EHORIZONS.IN
>> 011-32323262
>> 011-46334633
>>
>
>
>
> --
> IT DESK
> www.essencekey.com
> info at essencekey.com
> Contact: +91-1164722856
>

-- 
IT DESK
www.essencekey.com
info at essencekey.com
Contact: +91-1164722856
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20131024/8f65ed62/attachment-0001.html>